Home - Return to Previous Page
ICON Vehicle Dynamics 20-UP GLADIATOR 2.5" STAGE 4 SUSPENSION SYSTEM - K22104
FRDK-K22104
2020-UP JEEP GLADIATOR JT 2.5" STAGE 4 SUSPENSION SYSTEM
Pricing:
$2,543.45
Description
The Stage 4 ICON 2.5” Suspension System for the Jeep Gladiator is the ideal setup for drastically improving on-road ride quality and overall performance for the daily driven application that will see frequent, moderate off-road use. This complete suspension system features 2.0 Aluminum Series shocks, 2.5” lift dual-rate front coil springs, a tubular steel fixed front lower link kit, billet front sway bar links, a triple-rate rear coil spring kit, a rear sway bar relocation kit, front and rear adjustable track bars, and all necessary hardware for install. This system provides an increase of over 30% front and 20% rear wheel travel and was designed around the use of a 35” tire. For those looking to run a 37” tire this can be achieved with the ICON Jeep JT Bump Stop Spacer Kit (Part #22071).
2.5" lift heightFits 35" tires (37" with extended bump stop spacer kit)33% front, 23% rear increase in wheel travelImproves on and off-road ride quality over stockFront lower links included for caster angle correction and improved front end articulationDual rate front coil springs with lifetime guarantee against sagging/breakageTriple rate rear coil springs with ICON-engineered droop, ride, and overload rates2.0 Aluminum Series shocks with vehicle specific valvingFront and rear track bars ensure proper alignment and improved articulationAdjustable, billet aluminum front sway bar links100% bolt-on system makes for an easy install“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
Add-On Part: 22071 - 20-UP JT EXTENDED BUMP STOP SPACER KIT
Add-On Part: 22042 - 20-UP JT / 18-UP JL / 07-18 JK FRONT HYD BUMP STOP KIT
Add-On Part: 191014 - .25" COLLAR SPANNER PIN WRENCH
Bushings Included: Yes
California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Coil Spring End 1 Type: Open
Coil Spring End 2 Type: Open
Coils Quantity Front: 2
Coils Quantity Rear: 2
Grade Type: Performance
Maximum Lift: 2.5
Mounting Hardware Included: Yes
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" with optional bump stop spacer kit part # 22071)
Recommended Aftermarket Wheels: ICON Alloys - 18x9 w/ 4.5" Backspace / -12mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 20x9 w/ 4.5" Backspace / -12mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 17x8.5 w/ 4.5" Backspace / -6mm Offset
Shocks Included: Yes
Spring Color: Black
Spring Material: Steel
OEM Wheels & Tires Fitment: Yes;Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 4.5” Backspace / -6mm Offset;Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 4.5” Backspace / -12mm Offset;Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" with optional bump stop spacer kit PN: 22071);APPLICATION NOTE #127: Will Not Fit Gladiator Mojave Trim;APPLICATION NOTE #150: Shocks Are Fully Serviceable;TECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JT build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher than advertised if installed on a stock weighted vehicle.;TECH NOTE: Diesel models will net approx. 1.75" of front lift over stock due to their heavier weight.;Ships In Multiple Boxes
2.5" lift heightFits 35" tires (37" with extended bump stop spacer kit)33% front, 23% rear increase in wheel travelImproves on and off-road ride quality over stockFront lower links included for caster angle correction and improved front end articulationDual rate front coil springs with lifetime guarantee against sagging/breakageTriple rate rear coil springs with ICON-engineered droop, ride, and overload rates2.0 Aluminum Series shocks with vehicle specific valvingFront and rear track bars ensure proper alignment and improved articulationAdjustable, billet aluminum front sway bar links100% bolt-on system makes for an easy install“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
Add-On Part: 22071 - 20-UP JT EXTENDED BUMP STOP SPACER KIT
Add-On Part: 22042 - 20-UP JT / 18-UP JL / 07-18 JK FRONT HYD BUMP STOP KIT
Add-On Part: 191014 - .25" COLLAR SPANNER PIN WRENCH
Bushings Included: Yes
California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Coil Spring End 1 Type: Open
Coil Spring End 2 Type: Open
Coils Quantity Front: 2
Coils Quantity Rear: 2
Grade Type: Performance
Maximum Lift: 2.5
Mounting Hardware Included: Yes
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" with optional bump stop spacer kit part # 22071)
Recommended Aftermarket Wheels: ICON Alloys - 18x9 w/ 4.5" Backspace / -12mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 20x9 w/ 4.5" Backspace / -12mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 17x8.5 w/ 4.5" Backspace / -6mm Offset
Shocks Included: Yes
Spring Color: Black
Spring Material: Steel
OEM Wheels & Tires Fitment: Yes;Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 4.5” Backspace / -6mm Offset;Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 4.5” Backspace / -12mm Offset;Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" with optional bump stop spacer kit PN: 22071);APPLICATION NOTE #127: Will Not Fit Gladiator Mojave Trim;APPLICATION NOTE #150: Shocks Are Fully Serviceable;TECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JT build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher than advertised if installed on a stock weighted vehicle.;TECH NOTE: Diesel models will net approx. 1.75" of front lift over stock due to their heavier weight.;Ships In Multiple Boxes
Details
- FRDK-K22104
- FRDK-K22104
- Icon Vehicle Dynamics
- New
Shipping Information
- Item Requires Shipping
- 116.0 lbs.
- W13.0000” x H7.0000” x L21.0000”
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!