Home - Return to Previous Page

ICON Vehicle Dynamics 20-UP JEEP GLADIATOR 2.5" STAGE 5 SUSPENSION SYSTEM (BILLET) - K22105

FRDK-K22105
2020-UP JEEP GLADIATOR JT 2.5" STAGE 5 SUSPENSION SYSTEM WITH BILLET LINKS
Pricing: $4,763.30
Qty:

Description

The Stage 5 ICON 2.5” Suspension System for the Jeep Gladiator is the ideal setup for significantly improving off-road performance and overall ride quality for the application that will see frequent moderate off-road use. This complete suspension system features 2.0 Aluminum Series shocks, 2.5” lift dual-rate front coil springs, tubular steel fixed lower and adjustable upper front links, billet front sway bar links, a triple-rate rear coil spring kit, billet aluminum adjustable upper and lower rear links, a rear sway bar relocation kit, front and rear adjustable track bars, and all necessary hardware for install. This system provides an increase of over 30% front and 20% rear wheel travel and was designed around the use of a 35” tire. For those looking to run a 37” tire this can be achieved with the ICON Jeep JT Bump Stop Spacer Kit (Part #22071).

2.5" lift heightFits 35" tires (37" with extended bump stop spacer kit)33% front, 23% rear increase in wheel travelImproves on and off-road ride quality over stockFront upper and lower links included for caster angle correction and improved front end articulationRear billet upper and lower links improve rear end articulation and allow for on-vehicle pinion angle adjustmentDual rate front coil springs with lifetime guarantee against sagging/breakageTriple rate rear coil springs with ICON-engineered droop, ride, and overload rates2.0 Aluminum Series shocks with vehicle specific valvingFront and rear track bars ensure proper alignment and improved articulationAdjustable, billet aluminum front sway bar links100% bolt-on system makes for an easy install“ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability

Add-On Part: 22071 - 20-UP JT EXTENDED BUMP STOP SPACER KIT
Add-On Part: 22042 - 20-UP JT / 18-UP JL / 07-18 JK FRONT HYD BUMP STOP KIT
Add-On Part: 191014 - .25" COLLAR SPANNER PIN WRENCH
Bushings Included: Yes
California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Coil Spring End 1 Type: Open
Coil Spring End 2 Type: Open
Coils Quantity Front: 2
Coils Quantity Rear: 2
Grade Type: Performance
Maximum Lift: 2.5
Mounting Hardware Included: Yes
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" with optional bump stop spacer kit part # 22071)
Recommended Aftermarket Wheels: ICON Alloys - 18x9 w/ 4.5" Backspace / -12mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 20x9 w/ 4.5" Backspace / -12mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 17x8.5 w/ 4.5" Backspace / -6mm Offset
Shocks Included: Yes
Spring Color: Black
Spring Material: Steel
OEM Wheels & Tires Fitment: Yes;Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 4.5” Backspace / -6mm Offset;Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 4.5” Backspace / -12mm Offset;Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" with optional bump stop spacer kit PN: 22071);APPLICATION NOTE #127: Will Not Fit Gladiator Mojave Trim;APPLICATION NOTE #150: Shocks Are Fully Serviceable;TECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JT build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher than advertised if installed on a stock weighted vehicle.;TECH NOTE: Diesel models will net approx. 1.75" of front lift over stock due to their heavier weight.;Ships In Multiple Boxes

Details

Shipping Information

  • Item Requires Shipping
  • 174.0 lbs.
  • W13.0000” x H7.0000” x L21.0000”

Customer Reviews

Comment Total Reviews (0)

Write the First Review!

You must login to post a review.