Home - Return to Previous Page
ICON Vehicle Dynamics 05-22 FORD F250/F350 STAGE 4 ULTIMATE FRONT END KIT - K6214
FRDK-K6214
The ICON Vehicle Dynamics Ultimate Front End Kits are designed to improve the steering feel, vehicle control, and overall drivability of your vehicle by replacing and upgrading critical worn OE components.
Pricing:
$1,838.85
Description
The ICON Vehicle Dynamics Ultimate Front End Kits are designed to improve the steering feel, vehicle control, and overall drivability of your vehicle by replacing and upgrading critical worn OE components. Partnering with our friends at Dynatrac, ICON is happy to pair our suspension components with Dynatrac HD BallJoints to provide a complete front-end suspension solution to solve common steering problems that can lead to loose steering feel, decreased stability, erratic tracking down the road, uneven tire wear, and even death-wobble.This Stage 4 Ultimate Front End Kit for the 2005-2022 Ford F-250 and F-350 Super Duty 4WD features the ICON Centerline Steering Stabilizer with a through-shaft design to eliminate the push/pull sensation associated with traditional steering stabilizers, resulting in more consistent damping and symmetrical steering feel throughout the input range. The large 2.5-inch diameter stabilizer body and piggyback reservoir increases fluid volume to prevent performance fade due to heat and cavitation. This unit provides a significant increase in steering damping compared to the stock equipment, for an improved driving experience with both stock size and oversize aftermarket wheels and tires. The kit also allows for increased steering travel compared to other aftermarket steering stabilizers. The stabilizer body shares components with ICON's proven 2.5 Series shock absorbers, meaning the unit is fully rebuildable. 2.5 Series features a 6061 hard anodized aluminum shock body for excellent corrosion resistance and a beefy 7/8” chrome plated induction-hardened steel shaft. FK Rod End bearings provide precise function & feel throughout steering range.Stage 4 also includes a full set of front upper and lower Dynatrac HD BallJoints. Dynatrac HD Balljoints feature heat-treated high-strength billet bodies with chromoly stems along with a heat-treated, precision-ground stainless-steel ball. Unique seals prevent contamination, and the ball joints have greaseable fittings and PTFE-coated wear points to provide a long, durable service life. These high-end ball joints Are also rebuildable what still installed in the front axle housing. The OEM ball joints often wear quickly with larger off-road tires, many road miles, or extreme off-roading. Replacing worn factory ball joints with Dynatrac HD BallJoints, built specifically for the rigorous demands of these vehicles, provides a long-term solution and help maximize the overall drivability of the Ford F-250 and F-350 Super Duty.Also included with the Stage 4 kit is the ICON 2005-2024 Ford Super Duty Track Bar Ball Joint Kit, a high quality, high strength replacement track bar ball joint for Ford F-250 and F-350. Their metal on mental internal construction ensures a rigid joint for improved handling characteristics and elimination of wobble associated with a sloppy ball joint and their greaseable design provides a long service life. This direct press-in replacement installs into either OE axles or ICON Vehicle Dynamics’ adjustable track bars, restoring the track bar back to “like new” feel.Being able to set the Caster and Camber Alignment into proper specifications is critical for balance and stability of your Ford Super Duty. So, to round out the Stage 4 kit is the ICON Vehicle Dynamics' 2005-2024 Ford F-250/F-350 Super Duty Alignment Cam Kit to provide additional caster to align your Super Duty back into factory spec when lifted with our suspension systems. Ford Super Duty Alignment Cams ensure that your vehicles suspension and steering are working in precise coordination, improving overall drivability.
Full set of genuine Dynatrac front upper and lower ball jointsImproves steering feel and vehicle controlCNC machined, high-strength componentsHeat-treated, high-strength billet bodies with chromoly stemsHeat-treated, precision-ground stainless-steel ballSealed, greaseable design and PTFE coated wear points ensure long service lifeOn-vehicle rebuildable designThrough shaft steering stabilizer design eliminates the push/pull sensation associated with traditional stabilizersProvides symmetrical steering feel throughout input rangeDrastically increased steering damping over stock unitOffers increased wheel travel compared to ICON's dual steering stabilizer kitFully rebuildable ICON Vehicle Dynamics 2.5 Series shockPiggyback reservoir design6061 hard anodized aluminum shock body provides excellent corrosion resistanceTrack bar ball joint is a direct press in replacement for OE axle or ICON track barsGreaseable design ensures long service lifeSealed dust boot prevents contaminationImproved strength and rigidity over OEM track bar ball jointAlignment cams add 2.3° of caster and .5° of camber over stockEnsures proper front-end alignment when installed in conjunction with compatible suspension liftsZinc plated cams for corrosion resistanceIncludes new ball joint cotter pins
Add-On Part: 64039 - 08-24 FSD TRACK BAR BUMP STEER BRACKET KIT
Adjustable: No
Adjustable Damping: No
California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Cotter Pin Hole: Yes
Dust Boot Included: Yes
Grade Type: Heavy Duty
Grease Fitting Included: Yes
Greaseable: Yes
Mount Type: Press In
TECH NOTE: Fits 2005-2022 Ford F-250/F-350 4WD;TECH NOTE: 2017-2022 trucks require minimum of 2" bump stop spacer. ICON Part # 64037;TECH NOTE: Alignment cams are optimized for vehicles with 2-3" of front lift. Not recommended for stock height vehicles.;TECH NOTE: Will not fit axles equipped with RCV axle shafts;TECH NOTE: Will not fit F-350 dually models equipped with Wide Track front axle;TECH NOTE: Steering stabilizer bracket mounts over stock front differential cover, not compatible with most aftermarket covers.;TECH NOTE: Not compatible with aftermarket tie rods;TECH NOTE: ICON track bar bracket part # 64039 is also recommended for 2008-2022 models to correct bump steer geometry;TECH NOTE: Track bar ball joint presses into OE front axle on 2005-2016 F-250/F-350. Compatible with OE or aftermarket track bars.;TECH NOTE: Track bar ball joint presses into ICON adjustable front track bar on 2017-2022 F-250/F-350. May not be compatible with other brands of aftermarket track bars.
ICON 05-22 FORD F250/F350 STAGE 4 ULTIMATE FRONT END KIT
Full set of genuine Dynatrac front upper and lower ball jointsImproves steering feel and vehicle controlCNC machined, high-strength componentsHeat-treated, high-strength billet bodies with chromoly stemsHeat-treated, precision-ground stainless-steel ballSealed, greaseable design and PTFE coated wear points ensure long service lifeOn-vehicle rebuildable designThrough shaft steering stabilizer design eliminates the push/pull sensation associated with traditional stabilizersProvides symmetrical steering feel throughout input rangeDrastically increased steering damping over stock unitOffers increased wheel travel compared to ICON's dual steering stabilizer kitFully rebuildable ICON Vehicle Dynamics 2.5 Series shockPiggyback reservoir design6061 hard anodized aluminum shock body provides excellent corrosion resistanceTrack bar ball joint is a direct press in replacement for OE axle or ICON track barsGreaseable design ensures long service lifeSealed dust boot prevents contaminationImproved strength and rigidity over OEM track bar ball jointAlignment cams add 2.3° of caster and .5° of camber over stockEnsures proper front-end alignment when installed in conjunction with compatible suspension liftsZinc plated cams for corrosion resistanceIncludes new ball joint cotter pins
Add-On Part: 64039 - 08-24 FSD TRACK BAR BUMP STEER BRACKET KIT
Adjustable: No
Adjustable Damping: No
California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Cotter Pin Hole: Yes
Dust Boot Included: Yes
Grade Type: Heavy Duty
Grease Fitting Included: Yes
Greaseable: Yes
Mount Type: Press In
TECH NOTE: Fits 2005-2022 Ford F-250/F-350 4WD;TECH NOTE: 2017-2022 trucks require minimum of 2" bump stop spacer. ICON Part # 64037;TECH NOTE: Alignment cams are optimized for vehicles with 2-3" of front lift. Not recommended for stock height vehicles.;TECH NOTE: Will not fit axles equipped with RCV axle shafts;TECH NOTE: Will not fit F-350 dually models equipped with Wide Track front axle;TECH NOTE: Steering stabilizer bracket mounts over stock front differential cover, not compatible with most aftermarket covers.;TECH NOTE: Not compatible with aftermarket tie rods;TECH NOTE: ICON track bar bracket part # 64039 is also recommended for 2008-2022 models to correct bump steer geometry;TECH NOTE: Track bar ball joint presses into OE front axle on 2005-2016 F-250/F-350. Compatible with OE or aftermarket track bars.;TECH NOTE: Track bar ball joint presses into ICON adjustable front track bar on 2017-2022 F-250/F-350. May not be compatible with other brands of aftermarket track bars.
ICON 05-22 FORD F250/F350 STAGE 4 ULTIMATE FRONT END KIT
Details
- FRDK-K6214
- FRDK-K6214
- Icon Vehicle Dynamics
- New
Categories
Shipping Information
- Item Requires Shipping
- 37.0 lbs.
- W12.0000” x H6.0000” x L27.0000”
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!