ICON Vehicle Dynamics 17-22 FORD F-250/F-350 7" STAGE 5 SUSPENSION SYSTEM - K67115

This ICON Vehicle Dynamics 7” suspension system is a great way to lift your 4WD 2017-2022 Ford F-250/F-350 Super Duty while drastically improving ride quality and performance. This suspension system is perfect for on-road and off-road use including towing, job site duty, and provides ultimate performance for extreme off-road adventure. ICON's 7" Stage 5 System is comprised of dual rate coil springs, progressive leaf springs, 4-Link kit, adjustable track bar, dual opposing steering stabilizer kit, ICON CDC Valve equipped 2.5 Aluminum Series piggyback reservoir front and rear shocks, plus all of the necessary hardware for installation.The Stage 5 system sees the inclusion of the ICON Vehicle Dynamics Ford Super Duty 4-Link kit, which further improves performance by eliminating suspension bind commonly experienced with factory radius arms during articulation. This “freeing up” of the front end and the ability of the 4-Link Kit to maintain positive caster through the range of travel equates to an unparalleled ride quality in all conditions. With the endless hours ICON has spent testing and tuning our suspension components and shocks as a complete package, you can rest assured knowing that you have the best suspension solution on the market.

Fits 2017-2022 F-250 / F-350 4WD applicationsFK Rod End bearings provide extended longevity and minimal deflectionLifetime guarantee against coil spring breakage or sagLifetime guarantee against ICON fabricated component breakage or manufacturer defectApproximately 50% increased front wheel travel over stockICON-engineered dual rate coil springs deliver exceptional vehicle control over varying terrainProgressive leaf springs improve ride quality without reducing towing capacityICON 4-Link system eliminates binding during articulation and maintains positive caster through the entire range of travelICON shocks feature vehicle specific tune for superior performance and ride qualityICON CDC Valve allows for 10 clicks of quick and easy compression adjustabilityShocks are fully rebuildable and revalvableOne-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish (2.5 Aluminum Series shocks)

Add-On Part: 614700 - 2.0 SHOCK BOOT KIT (EACH)
Add-On Part: 191014 - .25" COLLAR SPANNER PIN WRENCH
Bushings Included: Yes
California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Coils Quantity Front: 2
Dual Rate Coil Springs: Yes
Grade Type: Performance
Maximum Lift: 7
Mounting Hardware Included: Yes
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Tires: 37" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.25” Backspace / 6mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5” Backspace / 6mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.25” Backspace / 6mm Offset
Shocks Included: Yes
Spring Color: Black
Spring Material: Steel
OEM Wheels & Tires Fitment: Yes;Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.00” Backspace / 6mm Offset;Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.25” Backspace / 6mm Offset;Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.25” Backspace / 6mm Offset;Recommended Aftermarket Tires: 37" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.);APPLICATION NOTE #6: Springs Are Rated For Diesel Engines Only;APPLICATION NOTE #8: This System May Require A Carrier Bearing Drop Bracket Kit (33700);APPLICATION NOTE #29: 7” Systems Using A 4-Link In Place Of The Factory Radius Arms Do Not Require The Use Of Alignment Cams. Caster Can Be Adjusted By The Lower Link Arms.;APPLICATION NOTE #31: ‘08 - Current Superduty Models With Gas Engines May Need Exhaust Modified To Clear Front Driveshaft;APPLICATION NOTE #55: Shocks Are Fully Serviceable. Coilover Heights Indicated Are For A Stock Equipped Vehicle;APPLICATION NOTE #57: Factory Block Must Be Used In Conjunction With ICON Leaf Springs For Truck To Sit Level.;APPLICATION NOTE #118: Oem Stabilizer Does Not Work With Required Drag Link Flip On This Kit;TECH NOTE: 2017-2019 Super Duty models will have front lift height of 7" over stock.;TECH NOTE: 2020-2022 Super Duty models without Tremor package will have front lift height of 7.75" over stock. May require taller rear blocks with springs to sit level.;TECH NOTE: 2020-2022 Super Duty models equipped with Tremor package will have front lift height of 6.75" over stock. May require taller rear blocks with springs to sit level.;TECH NOTE: Brake line kit (Part # 61110) is optional for end users who do not want to bend the factory steel lines or are looking for a braided stainless upgrade (not necessary for complete install);Ships in multiple boxes