ICON Vehicle Dynamics 19-23 FORD RANGER 0-3.5" STAGE 1 SUSPENSION SYSTEM - K93201

ICON Vehicle Dynamics 2019-2023 Ford Ranger suspension systems are designed to dramatically increase the on and off-road ride quality. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. With wheel travel and ride quality in mind, ICON engineers researched each component of the new Ranger platform’s suspension and addressed any areas where performance could be extracted. The Stage 1 system includes vehicle-specific tuned 2.5 Series coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 0-3.5” allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.0 Aluminum Series monotube rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics 2019-2023 Ford Ranger Stage 1 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.

Height-adjustable coilovers provide a range of 0-3.5” of front lift heightFits 2WD & 4WD applicationsIncreased lift height allows for fitment of larger and more aggressive tiresUp to 25% increase in front wheel travel over stockICON shocks feature vehicle specific tune for superior performance and ride qualityCorrosion resistant anodized shock body with 5/8″ shaft (2.0 Aluminum Series shocks)Corrosion resistant CAD plated shock body with 7/8″ shaft (2.5 Series shocks)FK Rod End bearings provide extended longevity and minimal deflectionShocks are fully rebuildable and revalvableDirect bolt-in design makes for a simple and straightforward installationLifetime guarantee against ICON fabricated component breakage or manufacturer defect

Add-On Part: 614700 - 2.0 SHOCK BOOT KIT (EACH)
Add-On Part: 191003 - ICON SHORT 2.5 COIL WRAP W/LOGO PAIR (11.25-12.25)
Add-On Part: 198000 - 2 PIN COILOVER SPANNER WRENCH KIT
Add-On Part: 191205 - UNIVERSAL FOAM BUMP STOP KIT
Add-On Part: 198001 - BILLET SPANNER WRENCH KIT
Bushings Included: Yes
California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Coils Quantity Front: 2
Dual Rate Coil Springs: NO
Grade Type: Performance
Maximum Lift: 3.5
Mounting Hardware Included: Yes
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Tires: 33"x11.25" (Larger Tires May Fit but Fender Trimming and Modifications will be Required)
Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 6.00” Backspace / 25mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.75” Backspace / 25mm Offset
Shocks Included: Yes
Spring Color: Black
Spring Material: Steel
Factory Wheels & Tires Fitment: Yes;Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.75” Backspace / 25mm Offset;Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 6.00” Backspace / 25mm Offset;Recommended Aftermarket Tires: 33"x11.25" (Larger Tires May Fit but Fender Trimming and Modifications will be Required);APPLICATION NOTE #55: Shocks Are Fully Serviceable. Coilover Heights Indicated Are For A Stock Equipped Vehicle;APPLICATION NOTE #110: Minor Trimming Required For Recommended Tire Size;TECH NOTE: Ranger XLT or Lariat models equipped with Tremor package have front lift height range of 0-2.5" over stock.;TECH NOTE: Not compatible with Ranger Raptor;TECH NOTE: Included rear shocks are compatible with 0-1.5" of rear lift over stock.

ICON 19-23 FORD RANGER 0-3.5" STAGE 1 SUSPENSION SYSTEM