Dynatrac 20-UP JEEP GLADIATOR 3" SUSPENSION LIFT SYSTEM 8 - JT30-1X5310-L8

The Dynatrac 3" Suspension Lift System 8 for the 2020-Up Jeep Gladiator JT is designed for the driver looking to drastically improve the performance and ride quality of their vehicle. System 8 builds off of System 4 with upgraded 2.5 EnduroSport shocks for improved shock damping and heat dissipation. This system includes 3" lift front dual rate coil springs, 1.5" lift triple rate rear coil springs, 2.5 EnduroSport shocks, bump stop spacers, adjustable front sway bar links and rear brackets, and all necessary hardware to complete the installation. The front lower links included with this system are constructed from thick wall steel tubing, provide increased castor numbers, and feature dual durometer bushings for noise free operation, maximum articulation, and minimal bind. With this combination of components, Dynatrac was able to increase wheel travel numbers by 3" in front and 2" in the rear, significantly improving the performance of the 2020-Up JT. The 3.0” Lift System allows or fitment of 35" tires when used with Dynatrac's recommended wheel specifications. For users looking to install 37" tires, an optional extended bump stop spacer kit (Part # DT922071) is available.

3" front lift height and 1.5" of rear lift over stock Fits 35" tires (37" with optional extended bump stop spacer kit, Part # DT922071) 3" front, 2" rear increase in wheel travel Improves on and off-road ride quality over stock Dual rate front coil springs and triple rate rear coils with lifetime guarantee against sagging/breakage 2.5 EnduroSport shocks with Jeep JL specific valving offer greater shock damping and performance Adjustable front sway bar links and rear sway bar brackets eliminate sway bar bind Tubular steel link arms with dual durometer bushings for noise free performance, maximum articulation, and minimal bind Adjustable track bars offer on-Jeep adjustability, improve steering response, and reduce suspension bind under articulation 100% bolt-on system makes for an easy install Tested under rigorous off-road conditions to validate tune, performance, strength, and durability

Bushings Included: No
California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Coil Spring End 1 Type: Closed
Coil Spring End 2 Type: Closed
Coils Quantity Front: 2
Coils Quantity Rear: 2
Grade Type: Performance
Maximum Lift Front: 3
Maximum Lift Rear: 1.5
Mounting Hardware Included: Yes
Shocks Included: Yes
Spring Color: Black
Spring Material: Steel

OEM Wheels & Tires Fitment: Yes;Recommended Aftermarket Wheels: 17x8.5" w/ 4.5” Backspace / -6mm Offset;Recommended Aftermarket Tires: 35 x 12.50 (37 x 12.50 with optional extended bump stop spacer kit PN: DT922071);TECH NOTE: Dynatrac's advertised lift heights are based around a typical Jeep JT build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher than advertised if installed on a stock weighted vehicle.;TECH NOTE: Springs are NOT rated for use with models equipped with EcoDiesel engines.;TECH NOTE: Jeep Gladiator Mojave also requires heim spacer kit, part # DT9611070;TECH NOTE: Spanner wrench available to aid in length adjustment. Part # DT9191014.

DYNATRAC 20-UP JEEP GLADIATOR 3" SUSPENSION LIFT SYSTEM 8