- Home »
- Catalog
Complete Offroad » Toyota, 4Runner
Products for:
- Make: Toyota
- Model: 4Runner
View Universal items for: Toyota 4Runner
Browse Products
Description: 7.5" IFS axle side seal. Yukon Mighty seal.
Item #: FDHC-YMST1003
Condition:
New
Price: $10.89
Description: 7.5", 8", & V6 rear axle bearing snap ring / retainer clip
Item #: FDHC-YSPSR-017
Condition:
New
Price: $8.89
Description: 8" cross pin shaft, standard Open
Item #: FDHC-YSPXP-045
Condition:
New
Price: $38.89
Description: 8" IFS clamshell carrier, 3.91 and up, 07 & up FJ, 05 & up TAC/T100/TNDRA.
Item #: FDHC-YC TLCF-CS-4
Condition:
New
Limited Supply: Only 4 Left!
Price: $923.89
Description: 8" roll pin, solid
Item #: FDHC-YSPXP-044
Condition:
New
Price: $12.89
Description: 8" standard Open pinion gear Thrust washer.
Item #: FDHC-YSPTW-054
Condition:
New
Price: $10.89
Description: 8" standard Open side gear Thrust washer.
Item #: FDHC-YSPTW-057
Condition:
New
Price: $14.89
Description: 8" Toyota dropout case, all new, includes adjusters.
Item #: FDHC-YP DOT8
Condition:
New
Price: $335.89
Description: Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up.
Item #: FDHC-MK T8.2
Condition:
New
Please Call for Availability
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK T8-C
Condition:
New
Please Call for Availability
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK T8-D
Condition:
New
Please Call for Availability
Description: Air line repair kit, ZIP locker.
Item #: FDHC-YZLAL-KIT
Condition:
New
Please Call for Availability
Description: 7.5" V6 & 4cyl side shim kit (incl. 7 shims).
Item #: FDHC-SK CCT7.5-SIDE
Condition:
New
Price: $98.89
Description: Crush Sleeve for GM 55-62 car & truck and Toyota 8". 2.510" long.
Item #: FDHC-YSPCS-018
Condition:
New
Price: $14.89
Description: 8" Toyota solid crush sleeve replacement spacer kit, preload.
Item #: FDHC-SK CST8
Condition:
New
Price: $69.89
Description: V6 Toyota solid crush sleeve replacement spacer kit, preload.
Item #: FDHC-SK CSTV6
Condition:
New
Price: $69.89
Description: Crush Sleeve for Toyota V6, Landcruiser reverse front & Tacoma/T100 with factory locker, 1.820" long.
Item #: FDHC-YSPCS-035
Condition:
New
Price: $16.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T8-571-29
Condition:
New
Price: $407.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T7.5-488
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T7.5-529
Condition:
New
Price: $390.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T7.5-571
Condition:
New
Price: $428.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T8-390K
Condition:
New
Price: $431.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T8-411-29
Condition:
New
Price: $407.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T8-411K
Condition:
New
Price: $431.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T8-456-29
Condition:
New
Price: $407.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T8-456K
Condition:
New
Price: $431.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T8-488-29
Condition:
New
Price: $407.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T8-488K
Condition:
New
Price: $431.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T8-529-29
Condition:
New
Price: $407.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T8-529K
Condition:
New
Price: $431.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T8-571K
Condition:
New
Price: $431.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG TLCF-488R-CS
Condition:
New
Price: $483.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG TV6-488K
Condition:
New
Price: $441.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG TV6-529K
Condition:
New
Price: $447.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG TV6-373-29
Condition:
New
Price: $517.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG TV6-411-29
Condition:
New
Not Available
Price: $407.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG TV6-411K
Condition:
New
Price: $441.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG TV6-430-29
Condition:
New
Not Available
Price: $407.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG TV6-456-29
Condition:
New
Not Available
Price: $407.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG TV6-456K
Condition:
New
Price: $450.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG TV6-488-29
Condition:
New
Not Available
Price: $407.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG TV6-529-29
Condition:
New
Not Available
Price: $407.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T7.5R-488R
Condition:
New
Price: $410.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T7.5R-529R
Condition:
New
Price: $336.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG TLCF-488R-CS-T
Condition:
New
Price: $499.89
Description: Toyota 8" Reverse Front 3.73 Ring & Pinion (CLAMSHL Design ONLY- fits3.73 & DWN carrier) .
Item #: FDHC-YG TLCF-373R-CS
Condition:
New
Price: $480.89
Description: Toyota 8" Reverse Front 4.30 Ring & Pinion (CLAMSHL Design ONLY- fits3.91 & UP carrier) .
Item #: FDHC-YG TLCF-430R-CS
Condition:
New
Price: $480.89
Description: Toyota 8" Reverse Front 5.29 Ring & Pinion (CLAMSHL Design ONLY- fits3.91 & UP carrier) .
Item #: FDHC-YG TLCF-529R-CS
Condition:
New
Price: $480.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG T7.5R-456R
Condition:
New
Price: $397.89
Description: Inner axle seal for 7.5", 8" and V6 Toyota rear. Yukon Mighty seal.
Item #: FDHC-YMS1960
Condition:
New
Price: $23.89
Description: Inner stub shaft bearing for Toyota
Item #: FDHC-YB AX-015
Condition:
New
Price: $177.89
Description: O-ring for Toyota & Dana 44 ZIP locker seal housing
Item #: FDHC-YZLAO-01
Condition:
New
Price: $11.89
Description: O-ring for Yukon Zip Locker Bulkhead fitting kit
Item #: FDHC-YZLAO-05
Condition:
New
Price: $12.89
Description: Oil baffle for Toyota Landcruiser reverse rotation front, 8" IFS front & TV6/Tacoma rear with factory locker.
Item #: FDHC-YSPBF-008
Condition:
New
Price: $10.89
Description: Toyota 29spl V6 and clamshell front, outer oil slinger.
Item #: FDHC-YSPBF-027
Condition:
New
Price: $21.89
Description: Outside axle seal for 7.5", 8" and V6 Toyota rear. Yukon Mighty seal.
Item #: FDHC-YMS1956
Condition:
New
Price: $33.89
Description: Outer oil slinger for Toyota 7.5", 8", V6 & Landcruiser.
Item #: FDHC-YSPBF-026
Condition:
New
Price: $12.89
Description: 8" Toyota, 7.5" GM, 8.2" GM, 12T, pinion shim set, & Mazda truck.
Item #: FDHC-SK T8
Condition:
New
Price: $31.89
Description: Pinion flange dust shield for Toyota 8" clamshell front
Item #: FDHC-YSPBF-040
Condition:
New
Price: $28.89
Description: Pinion nut for Suzuki Samurai, Toyota 8", V6, Landcruiser (fine spline pinion) & T100/Tacoma with factory locker. 30mm socket, M20 x 1.5 thread.
Item #: FDHC-YSPPN-022
Condition:
New
Price: $8.89