- Home »
- Catalog
Complete Offroad » 2009, Ford, Explorer Sport Trac
Products for:
- Year: 2009
- Make: Ford
- Model: Explorer Sport Trac
View Universal items for: 2009 Ford Explorer Sport Trac
Browse Products
Description: Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals.
Item #: FDHC-AK 1559
Condition:
New
Price: $40.89
Description: This kit uses Koyo bearings and races and high-quality small parts. USA Standard Gear does extensive research for each application to make sure your kit arrives with all the correct parts needed to install your ring and pinion gear set.
Item #: FDHD-ZBKF8.8
Condition:
New
Price: $142.89
Description: 03 and up Explorer 5 lug axle, left hand, 8.8", 31 spline, W/ traction control. This in an independent rear suspension CV shaft. Does not fit sport trac.
All 1541H material Yukon axles come...More Details »
Item #: FDHC-YA F880052
Condition:
New
Price: $433.37
Description: Left hand axle for '03 & up Explorer Sport Trac. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost.
All 1541H material Yukon axles come with a ten (10)...More Details »
Item #: FDHC-YA F880048
Condition:
New
Price: $493.23
Description: 1310 Dana Spicer Lifetime U/joint. 1.718" snap ring span, 1.00" cap diameter. Inside snap ring.
Item #: DS U-1310
Condition:
New
Price: $29.23
No Image Available
Description: 1310 Snap Tight U/Joint. 3.219" snap ring span, 1.062" cap diameter. Outside snap ring.
Item #: DS U-787
Condition:
New
Price: $41.40
Description: 1310 Spicer U/Joint, with zerk fitting in cap.
Item #: DS U-1310-1
Condition:
New
Price: $45.89
No Image Available
Description: 1310 to 7260 conversion U/Joint, w/o zerk..
Item #: DS U-788
Condition:
New
Price: $40.67
Description: 1310 to 7260 conversion U/Joint, w/o zerk.
Item #: DS U-634
Condition:
New
Price: $18.11
No Image Available
Description: 1330 Dual-size cap U/Joint. 3.625" snap ring span. One set of caps is 1.125" in diameter and the other is 1.062". Outside snap ring.
Item #: DS U-7438
Condition:
New
Price: $31.77
No Image Available
Description: 1330 Snap Tight U/Joint. 3.625" snap ring span, 1.062" cap diameter. Outside snap ring.
Item #: DS U-792
Condition:
New
Price: $44.14
No Image Available
Description: 1330 to Mechanics 3R adapter U/Joint.
Item #: DS U-212
Condition:
New
Price: $54.88
Description: 1350 to Mechanics 3R adaptor U/joint.
Item #: DS U-1153
Condition:
New
Price: $59.95
Description: 22 plate Carbon clutches for GM 8.2", GM", 12T, 12P, Ford 8.8" & Vast Iron 'Vette
Item #: FDHC-YPKGM12-PC-22
Condition:
New
Please Call for Availability
Description: ARB Air Locker Differential 1.16 in. Shaft Spline 27 Ratio 3.54 And Down Dana IFS
Item #: BHWQ-RD101
Condition:
New
Price: $1,113.95
Description: ARB Air Locker Differential 1.31 in. Shaft Spline 30 Ratio 3.54 And Up Dana 35 Suits C-Clip Or Non C-Clip Type Shafts
Item #: BHWQ-RD105
Condition:
New
Price: $1,113.95
Description: ARB Air Locker Differential Shaft Spline 31 Ratio All 8.8 in. Diam. Ring Gear C-Clip
Item #: BHWQ-RD81
Condition:
New
Price: $1,113.95
Description: ARB Air Locker Differential Shaft Spline 28 Ratio All 8.8 in. Diam. Ring Gear IFS
Item #: BHWQ-RD82
Condition:
New
Price: $1,113.95
Differential Rebuild Kit
Description: Differential Fits: 1987-2011 Ford Vehicles
Item #: BKMN-F88BI
Condition:
New
Please Call for Availability
No Image Available
Description: Dana U/Joint with zerk fitting. 2.375" snap ring span, 1.062" cap diameter. Inside snap ring.
Item #: DS U-1200
Condition:
New
Price: $31.70
No Image Available
Description: 1310 to 7260 adaptor U/joint.
Item #: DS U-353
Condition:
New
Price: $42.63
No Image Available
Description: 1310 to 7290 adaptor U/joint.
Item #: DS U-354
Condition:
New
Price: $88.71
Description: The Detroit locker provides maximum traction for off-road or racing use. The heavy-duty case and internals provide a dramatic increase in strength while giving 100% torque to both tires. The...More Details »
Item #: 187C-145A
Condition:
New
Please Call for Availability
Description: FORD 8.8" 2009 & DOWN STRAIGHT AXLE MASTER OVERHAUL KIT (INCL SUPER SHMS)
Master Overhaul kit for Ford 8.8" differential. This kit uses Timken bearings and races along with high quality...More Details »
Item #: K F8.8-A
Condition:
New
Price: $217.70
Description: Yukon Ring & Pinion sets give you the confidence of knowing you're running gears designed for the harshest of conditions. Whether it's on the street, off-road, or at the track; Yukon ring & pinion...More Details »
Item #: G F8.8-308
Condition:
New
Price: $385.10
Description: Yukon Ring & Pinion sets give you the confidence of knowing you're running gears designed for the harshest of conditions. Whether it's on the street, off-road, or at the track; Yukon ring & pinion...More Details »
Item #: G F8.8-327
Condition:
New
Price: $361.70
Description: Yukon Ring & Pinion sets give you the confidence of knowing you're running gears designed for the harshest of conditions. Whether it's on the street, off-road, or at the track; Yukon ring & pinion...More Details »
Item #: G F8.8-331
Condition:
New
Price: $361.70
Description: Yukon Ring & Pinion sets give you the confidence of knowing you're running gears designed for the harshest of conditions. Whether it's on the street, off-road, or at the track; Yukon ring & pinion...More Details »
Item #: G F8.8-355
Condition:
New
Price: $372.50
Description: Yukon Ring & Pinion sets give you the confidence of knowing you're running gears designed for the harshest of conditions. Whether it's on the street, off-road, or at the track; Yukon ring & pinion...More Details »
Item #: G F8.8-373
Condition:
New
Price: $366.20
Description: Yukon Ring & Pinion sets give you the confidence of knowing you're running gears designed for the harshest of conditions. Whether it's on the street, off-road, or at the track; Yukon ring & pinion...More Details »
Item #: G F8.8-456
Condition:
New
Price: $418.40
Description: Yukon Ring & Pinion sets give you the confidence of knowing you're running gears designed for the harshest of conditions. Whether it's on the street, off-road, or at the track; Yukon ring & pinion...More Details »
Item #: G F8.8-488
Condition:
New
Price: $429.20
Description: Yukon Ring & Pinion sets give you the confidence of knowing you're running gears designed for the harshest of conditions. Whether it's on the street, off-road, or at the track; Yukon ring & pinion...More Details »
Item #: G F8.8-513
Condition:
New
Price: $429.20
Description: Yukon Ring & Pinion sets give you the confidence of knowing you're running gears designed for the harshest of conditions. Whether it's on the street, off-road, or at the track; Yukon ring & pinion...More Details »
Item #: G F8.8-571
Condition:
New
Price: $558.80
Description: Lube Locker cover gasket for Ford 8.8"
Item #: LLGF880
Condition:
New
Price: $29.30
Description: Designed for uncompromising quality and performance in high demand motorsports, LubeLocker Gaskets are without equal. Rock crawlers, drag racers,circle track, desert racers and off-roaders will...More Details »
Item #: LLGD035
Condition:
New
Price: $29.30
Description: Master Overhaul Kit for Model 35 IFS differential for Explorer and Ranger. This kit uses Timken Bearings and Races along with high quality seals and small parts. Included in this kit are carrier...More Details »
Item #: K M35-IFS
Condition:
New
Price: $490.40
Description: Plastic cover for Ford 8.8"
Item #: FDHC-YP C5-F8.8-P
Condition:
New
Price: $149.17
Description: Fits Ford 8.8" with 31 spline axles and 7/8" cross pin shaft Made from 9310 steel for added strength Replaces the spiders in a standard carrier case
Item #: SL F8.8-31
Condition:
New
Please Call for Availability
Description: Spartan spring & pin kit, fits smaller designs.
Item #: SL SPRING-SM
Condition:
New
Please Call for Availability
Description: DANA SPICER'S STRONGEST U-JOINT FOR THE DANA 44 FEATURES A FORGED TRUNNION FOR INCREASED STRENGTH. DIRECT REPLACEMENT FOR 297 STYLE U-JOINTS... DOES NOT have grease zerk (stronger)
4)1.186" caps
3.30" cross
Item #: DS U-760
Condition:
New
Price: $42.03
Description: True-Trac limited slip for Ford 8.8" with 31 spline axles. Three pinion design. The True Trac limited slip uses a worm-gear design to bias torque from one tire to the other, providing extremely...More Details »
Item #: 913A561
Condition:
New
Price: $641.63
Description: DANA SPICER 3.25 CAP TO CAP, 1-1/16" CAP DIAMETER, FOR 1310 YOKES.
Item #: DS U-153
Condition:
New
Price: $21.22
Description: MATES A 1310 YOKE TO A 1330 YOKE
4)1-1/16" caps
3.24" cap to cap and
3.63" cap to cap
Item #: DS U-134
Condition:
New
Price: $33.53
Description: DANA SPICER
4)1.184" caps
3.63" cap to cap
Item #: DS U-178
Condition:
New
Price: $31.74
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure products pass dimensional, material, and fitment testing.
Item #: FDHD-ZG M35-307
Condition:
New
Price: $257.89
Description: The Spartan Locker is a lunchbox locker that delivers reliable, 100% lockup traction at a low cost. It's design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap!
Item #: FDHD-SL F8.8-31
Condition:
New
Price: $581.89
Description: The Spartan Locker delivers reliable, 100% lockup traction at a low cost. This heavy-duty cross pin shaft is engineered and manufactured to the highest standards. Measures 7/8" outside diameter.
Item #: FDHD-SL XP-F8.8
Condition:
New
Price: $48.89
Description: Spartan Lockers deliver reliable, 100% lockup traction at a low cost. This Spartan Locker Spring & Pin Kit includes springs, alignment pins, and retainer wires.
Item #: FDHD-SL SPRING-SM
Condition:
New
Price: $23.89
Description: Fits '01-'03 Ford Explorer Sport Trac two door front with 4.0L engine. 24" long weld to weld.
Item #: FDHD-ZDS9451A
Condition:
New
Price: $350.55
Description: USA Standard Gear standard spider gear set for 8.8" Trac Loc posi, 31 spline
Item #: FDHD-ZIKF8.8-T/L-31
Condition:
New
Price: $265.89
Description: USA Standard Gear standard spider gear set for Ford 8.8", 31 spline
Item #: FDHD-ZIKF8.8-S-31
Condition:
New
Price: $181.89
Description: USA Standard Gear Master Overhaul Kits provide all of the necessary parts for a differential overhaul in one simple part number. Save time and money, and get the exact parts you need for your specific installation.
Item #: FDHD-ZK F8.8
Condition:
New
Price: $177.89
Description: USA Standard Gear Master Overhaul Kits provide all of the necessary parts for a differential overhaul in one simple part number. Save time and money, and get the exact parts you need for your specific installation.
Item #: FDHD-ZK M35-IFS
Condition:
New
Price: $381.89
Description: 8.8" FORD 09 & DWN PINION KIT .
Item #: FDHD-ZPKF8.8-A
Condition:
New
Price: $95.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure products pass dimensional, material, and fitment testing.
Item #: FDHD-ZG F8.8-308
Condition:
New
Price: $374.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure products pass dimensional, material, and fitment testing.
Item #: FDHD-ZG F8.8-327
Condition:
New
Price: $268.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure products pass dimensional, material, and fitment testing.
Item #: FDHD-ZG F8.8-331
Condition:
New
Price: $268.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure products pass dimensional, material, and fitment testing.
Item #: FDHD-ZG F8.8-373
Condition:
New
Price: $313.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure products pass dimensional, material, and fitment testing.
Item #: FDHD-ZG F8.8-390
Condition:
New
Price: $375.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure products pass dimensional, material, and fitment testing.
Item #: FDHD-ZG F8.8-355
Condition:
New
Price: $269.89