- Home »
- Catalog
Complete Offroad » 2007, Chevrolet
Products for:
- Year: 2007
- Make: Chevrolet
View Universal items for: 2007 Chevrolet
Browse Products
Description: Eaton Positraction shim kit for GM 14T.
Item #: FDHC-YPKGM14T-PC-SHI
Condition:
New
Price: $81.89
Description: Eaton Positraction shim kit for 9.5" GM.
Item #: FDHC-YPKGM9.5-PC-SHI
Condition:
New
Price: $41.89
Description: Eaton-type 14 plate Carbon clutch set for 9.5" GM and 9.75" Ford.
Item #: FDHC-YPKGM9.5-PC-14
Condition:
New
Price: $385.89
Description: Eaton-type Positraction Carbon clutch kit with 14 plates for GM 14T and 10.5"
Item #: FDHC-YPKGM14T-PC-14
Condition:
New
Price: $344.89
Description: Finned aluminum cover for Dana 80
Item #: FDHC-YP C5-D80-A
Condition:
New
Price: $233.89
Description: AAM 11.5" Finned aluminum cover for Dodge & GM
Item #: FDHC-YP C5-C11.5
Condition:
New
Price: $403.89
Description: 14T cover gasket.
Item #: FDHC-YCGGM14T
Condition:
New
Price: $16.89
Description: GM 7.2" crush sleeve. Approx. 1.610" long.
Item #: FDHC-YSPCS-024
Condition:
New
Price: $17.89
Description: GM 7.2" IFS Ring Gear bolt. 7/16" x 20.
Item #: FDHC-YSPBLT-018
Condition:
New
Price: $11.89
Description: 8.25IFS GM Right hand , 07-11 28Spline STUB AXLE SHAFT , 14.92" w/PILOT , 4WD (not AWD) .
Item #: FDHC-YA G15801499
Condition:
New
Price: $339.89
Description: 8.25IFS RIGHT HAND EXTREME INNER DISCONNECT STUB AXLE, '88-'08 GM 4WD FRONT, w/ needle bearing.
Item #: FDHC-YA GM19121908
Condition:
New
Price: $151.89
Description: GM 8.25" IFS case gasket, 2007 & up
Item #: FDHC-YCGGM8.25IFS
Condition:
New
Price: $39.89
Description: GM 8.25" IFS side adjuster, '07 & up
Item #: FDHC-YSPSA-010
Condition:
New
Price: $89.89
Description: 8.25IFS 07 & up GM side bearing adjuster lock ring.
Item #: FDHC-YSPSA-011
Condition:
New
Price: $38.89
Description: GM 9.25" IFS snap ring for outer stub.
Item #: FDHC-YSPSR-012
Condition:
New
Price: $10.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades.
Item #: FDHC-CK GM9.5
Condition:
New
Price: $228.89
Description: GM 9.5" ring gear bolt. 12mm x 1.5.
Item #: FDHC-YSPBLT-017
Condition:
New
Price: $7.89
Description: Yukon Gear & Axle manufactures a full line of top-quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers, seals, and...More Details »
Item #: FDHC-YSPBLT-080
Condition:
New
Price: $9.89
Description: GM side gear spacer sleeve for GM 9.25" IFS
Item #: FDHC-YSPTW-074
Condition:
New
Price: $41.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-354
Condition:
New
Price: $748.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-373
Condition:
New
Price: $726.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60V-409
Condition:
New
Price: $1,135.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-411
Condition:
New
Price: $516.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-430
Condition:
New
Price: $617.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-456
Condition:
New
Price: $516.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-488
Condition:
New
Price: $541.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-513
Condition:
New
Price: $516.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-538
Condition:
New
Price: $516.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-586
Condition:
New
Price: $625.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-617
Condition:
New
Price: $614.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-717
Condition:
New
Price: $672.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-342
Condition:
New
Price: $933.89
Description: Yukon engineers use state-of-the-art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish of our gear sets meet exacting...More Details »
Item #: FDHC-YG GM11.5-373
Condition:
New
Price: $876.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-411
Condition:
New
Price: $887.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-444
Condition:
New
Price: $933.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-456
Condition:
New
Price: $1,008.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-488
Condition:
New
Price: $933.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-513
Condition:
New
Price: $734.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-538
Condition:
New
Price: $734.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-456T
Condition:
New
Price: $517.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-488T
Condition:
New
Price: $517.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-513T
Condition:
New
Price: $516.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-538T
Condition:
New
Price: $643.89
Description: Inner axle retaining snap ring for 7.2" GM.
Item #: FDHC-YSPSR-011
Condition:
New
Price: $11.89
Description: Replacement limited slip (Positraction) clutch guide to fit Chrysler 9.25", Dana Spicer 44, Dana Spicer 50, Ford 8.8", GM 12 bolt passenger car, GM 8.2", 8.5" and 8.6", 1963-1979 Corvette and Nissan M226.
Item #: FDHC-YSPCG-003
Condition:
New
Price: $13.89
Description: Left hand adjuster lock nut for 9.25" GM.
Item #: FDHC-YSPSA-008
Condition:
New
Price: $25.89
Description: Left hand carrier bearing adjuster for 9.25" GM IFS.
Item #: FDHC-YSPSA-016
Condition:
New
Price: $110.89
Description: Locking key / wedge for Dana 60 & 70 spindle nut
Item #: FDHC-YSPSP-039
Condition:
New
Price: $32.89
Description: Long shaft inner clip for 9.25" GM IFS.
Item #: FDHC-YSPSR-015
Condition:
New
Price: $24.89
Description: Cover bolt for GM 7.25, 7.6, 8.0, 8.6, 9.25, 9.5, 14T & 11.5
Item #: FDHC-YSPBLT-082
Condition:
New
Price: $8.89
Description: Main Cap Stud kit for GM 7.5", 7.625", 8.5", 8.6", 12 bolt passenger car & truck
Item #: FDHC-YP TA-1815
Condition:
New
Price: $122.89
Description: O-ring for left hand carrier bearing adjuster for 9.25" GM IFS.
Item #: FDHC-YSPO-002
Condition:
New
Price: $19.89
Description: Outer wheel bearing retaining snap ring for GM 14T.
Item #: FDHC-YSPSR-014
Condition:
New
Price: $30.89
Description: Pilot bearing for 10.5" 14 bolt truck, 2.050" O.D.
Item #: FDHC-YB PB-004
Condition:
New
Price: $55.89
Description: 14T GM pinion shim kit.
Item #: FDHC-SK GM14T
Condition:
New
Price: $35.89
Description: 8.75-42, 8.75-89, 9.25" Chrysler & GM, 9.5", 10.25" pinion shim kit.
Item #: FDHC-SK GM9.5
Condition:
New
Price: $26.89
Description: Pinion depth shims for 7.5" GM, 7.75" GM, 8.2" GM, 12T, & other
Item #: FDHC-SK 21104
Condition:
New
Price: $27.89
Description: 8.25" IFS, 8.5", 12P, 7.5" F, 8.8" F, 8.25" Chrysler pinion shim kit.
Item #: FDHC-SK 25300
Condition:
New
Price: $30.89
Description: Pinion gear thrust washer for 8.25" GM IFS.
Item #: FDHC-YSPTW-039
Condition:
New
Price: $9.89
Description: Pinion gear thrust washer for GM 8.0"
Item #: FDHC-YSPTW-068
Condition:
New
Price: $9.89