- Home »
- Catalog
Complete Offroad » 1976, Dodge, Ramcharger
Products for:
- Year: 1976
- Make: Dodge
- Model: Ramcharger
View Universal items for: 1976 Dodge Ramcharger
Browse Products
Description: Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals.
Item #: FDHC-AK 1559
Condition:
New
Price: $40.89
Description: This tool helps seal inner front axles to the proper depth for Dana 30, 44 and 60 front differentials. No returns.
Item #: FDHC-YT SA-01
Condition:
New
Price: $201.89
Description: Apex Chassis Heavy Duty Front Upper Ball Joint Fits: 70-93 Jeep/Chevy/GMC/Dodge
Item #: JJSP-BJ148
Condition:
New
Price: $55.00
Description: ARB Air Locker Differential Shaft Spline 30 Ratio 3.73 And Down Dana 44M
Item #: BHWQ-RD117
Condition:
New
Price: $1,113.95
Rough Country 4 Inch Lift Kit - Rear Blocks - Dodge/Plymouth Ramcharger/Trailduster (74-77) - 320.20
Suspension Lift Kit
Description: 4 Inch Lift Kit Note: Does NOT fit models with Cummins diesel engine. ONLY fits models with Dana 44 front axle.
Item #: DHTP-320.20
Condition:
New
In Stock
Price: $599.95
Suspension Lift Kit
Description: 4 Inch Lift Kit Note: Does NOT fit models with Cummins diesel engine. ONLY fits models with Dana 44 front axle. New rear leaf springs replaces your factory equipped block.
Item #: DHTP-350.20
Condition:
New
In Stock
Price: $899.95
Leaf Spring Assembly
Description: Front Leaf Springs ONLY for models with 4" of suspension lift.
Item #: DHTP-8003Kit
Condition:
New
In Stock
Price: $319.95
Wheel Lug Nut Set
Description: Lug Nut Set
Item #: DHTP-122024CH
Condition:
New
In Stock
Price: $34.95
Wheel Lug Nut Set
Description: Lug Nut Set
Item #: DHTP-122024CHOE
Condition:
New
In Stock
Price: $34.95
Suspension Shock Absorber
Description: N3 Front Shocks
Item #: DHTP-23275_A
Condition:
New
In Stock
Price: $99.95
Suspension Shock Absorber
Description: N3 Rear Shocks
Item #: DHTP-23276_C
Condition:
New
In Stock
Price: $99.95
Steering Stabilizer
Description: N3 Steering Stabilizer
Item #: DHTP-8735530
Condition:
New
In Stock
Price: $59.95
Steering Stabilizer
Description: N3 Steering Stabilizer
Item #: DHTP-8735630
Condition:
New
In Stock
Price: $99.95
Leaf Spring Assembly
Description: Rear Leaf Springs ONLY for models with 4" of suspension lift. U-bolts are not supplied with this kit. U-bolts should be measured by the inner width, overall length, and thread pitch. Rough...More Details »
Item #: DHTP-8034Kit
Condition:
New
In Stock
Price: $449.95
Truck Bed Side Step
Description: Single Hoop Step Drilling required. Vehicle must have a structurally sound rocker panel to mount step. The minimum to mount to a flat rocker panel will be 3.25". If using the lower mounting hole...More Details »
Item #: DHTP-117510
Condition:
New
In Stock
Price: $99.95
Wheel
Description: Steel Wheel Center Cap Is Not Included Lug Nuts Are Not Included
Item #: DHTP-RC51-5185
Condition:
New
In Stock
Price: $69.95
Wheel
Description: Steel Wheel Center Cap Is Not Included Lug Nuts Are Not Included
Item #: DHTP-RC51-5885
Condition:
New
In Stock
Price: $59.95
Steering Stabilizer
Description: V2 Steering Stabilizer
Item #: DHTP-8735670
Condition:
New
In Stock
Price: $199.95
Description: USA Standard 8.25" CHRYSLER, 3.07 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with 1.62" ID Axle Bearing & Seals
Item #: FDHD-ZGK2185
Condition:
New
Price: $622.89
Description: USA Standard 8.25" CHRYSLER, 3.55 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with 1.62" ID Axle Bearing & Seals
Item #: FDHD-ZGK2186
Condition:
New
Price: $535.89
Description: USA Standard 8.25" CHRYSLER, 3.73 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with 1.62" ID Axle Bearing & Seals
Item #: FDHD-ZGK2187
Condition:
New
Price: $576.89
Description: USA Standard 8.25" CHRYSLER, 3.90 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with 1.62" ID Axle Bearing & Seals
Item #: FDHD-ZGK2188
Condition:
New
Price: $515.89
Description: USA Standard 8.25" CHRYSLER, 4.11 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with 1.62" ID Axle Bearing & Seals
Item #: FDHD-ZGK2189
Condition:
New
Price: $520.89
Description: USA Standard 8.25" CHRYSLER, 4.56 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with 1.62" ID Axle Bearing & Seals
Item #: FDHD-ZGK2190
Condition:
New
Price: $534.89
Description: USA Standard 8.25" CHRYSLER, 4.88 Ratio Rear Ring & Pinion Gear Set and Master Install Kit Package, with 1.62" ID Axle Bearing & Seals
Item #: FDHD-ZGK2191
Condition:
New
Price: $528.89
Description: This kit uses Koyo bearings and races and high-quality small parts. USA Standard Gear does extensive research for each application to make sure your kit arrives with all the correct parts needed to install your ring and pinion gear set.
Item #: FDHD-ZBKD44
Condition:
New
Price: $218.89
Description: USA Standard Gear driveshafts are built new from high-grade steel and many components have been upgraded from OEM to eliminate known issues. They’re computer balanced and maintenance free,...More Details »
Item #: FDHD-ZDS9710
Condition:
New
Price: $552.89
Description: The Spartan Locker is a lunchbox locker that delivers reliable, 100% lockup traction at a low cost. It's design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap!
Item #: FDHD-SL C8.25-27
Condition:
New
Price: $750.89
Description: The Spartan Locker is a lunchbox locker that delivers reliable, 100% lockup traction at a low cost. It's design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap!
Item #: FDHD-SL C8.25-29
Condition:
New
Price: $699.89
Description: The Spartan Locker is a lunchbox locker that delivers reliable, 100% lockup traction at a low cost. It's design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap!
Item #: FDHD-SL D44-30
Condition:
New
Price: $624.89
Description: This Spartan Locker heavy-duty cross pin shaft is engineered and manufcatured to the highest standards. Works with Spartan Locker or standard open spider gears
Item #: FDHD-SL XP-C8.25
Condition:
New
Price: $48.89
Description: The Spartan Locker delivers reliable, 100% lockup traction at a low cost. This heavy-duty cross pin shaft is engineered and manufactured to the highest standards. Measures .748" outside diameter.
Item #: FDHD-SL XP-D44
Condition:
New
Price: $48.89
Description: Spartan Lockers deliver reliable, 100% lockup traction at a low cost. This Spartan Locker Spring & Pin Kit includes springs, alignment pins, and retainer wires.
Item #: FDHD-SL SPRING-SM
Condition:
New
Price: $23.89
Description: USA Standard axle for '79 & older Chrysler truck, 9.25". 31 11/16", 5 x 4.5" bolt pattern
Item #: FDHD-ZA C3723824
Condition:
New
Price: $265.89
Description: This kit uses Koyo bearings and races and high-quality small parts. USA Standard Gear does extensive research for each application to make sure your kit arrives with all the correct parts needed to install your ring and pinion gear set.
Item #: FDHD-ZBKC9.25-R-A
Condition:
New
Price: $246.89
Description: This kit uses Koyo bearings and races and high-quality small parts. USA Standard Gear does extensive research for each application to make sure your kit arrives with all the correct parts needed to install your ring and pinion gear set.
Item #: FDHD-ZBKC8.25-B
Condition:
New
Price: $140.89
Description: USA Standard Gear open spider gear set for Chrysler 8.25", 27 spline .
Item #: FDHD-ZIKC8.25-S-27
Condition:
New
Price: $194.89
Description: USA Standard Gear open spider gear set for Chrysler 9.25", 31 spline
Item #: FDHD-ZIKC9.25-S-31
Condition:
New
Price: $184.89
Description: USA Standard Gear open spider gear set for Dana Spicer 44, 30 spline
Item #: FDHD-ZIKD44-S-30
Condition:
New
Price: $182.89
Description: USA Standard Gear Master Overhaul Kits provide all of the necessary parts for a differential overhaul in one simple part number. Save time and money, and get the exact parts you need for your specific installation.
Item #: FDHD-ZK C9.25-R
Condition:
New
Price: $242.89
Description: USA Standard Gear Master Overhaul Kits provide all of the necessary parts for a differential overhaul in one simple part number. Save time and money, and get the exact parts you need for your specific installation.
Item #: FDHD-ZK C8.25-B
Condition:
New
Price: $166.89
Description: USA Standard Gear Master Overhaul Kits provide all of the necessary parts for a differential overhaul in one simple part number. Save time and money, and get the exact parts you need for your specific installation.
Item #: FDHD-ZK D44
Condition:
New
Price: $269.89
Description: USA Standard mini spool for Dana 44 with 30 spline axles
Item #: FDHD-ZP MINSD44-30
Condition:
New
Price: $132.89
Description: USA Standard pinion installation kit for '76 and up Chrysler 8.25"
Item #: FDHD-ZPKC8.25-B
Condition:
New
Price: $138.89
Description: 9.25" Chrysler REAR PINION KIT .
Item #: FDHD-ZPKC9.25-R
Condition:
New
Price: $114.89
Description: Dana 44 front pinion installation kit.
Item #: FDHD-ZPKD44
Condition:
New
Price: $151.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-488T
Condition:
New
Price: $287.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-513T
Condition:
New
Price: $319.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-308
Condition:
New
Price: $287.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-392
Condition:
New
Price: $287.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-411
Condition:
New
Price: $287.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-456
Condition:
New
Price: $277.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-456T
Condition:
New
Price: $277.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-488
Condition:
New
Price: $324.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-513
Condition:
New
Price: $287.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-538
Condition:
New
Price: $287.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-589
Condition:
New
Price: $287.89
Description: USA Standard ring and pinion sets are designed to provide a quality and quiet gear set for OEM replacement. USA Standard's rigorous in-house quality testing and inspections ensure all products pass...More Details »
Item #: FDHD-ZG C9.25-321
Condition:
New
Price: $385.89
Description: USA Standard ring and pinion sets are designed to provide a quality and quiet gear set for OEM replacement. USA Standard's rigorous in-house quality testing and inspections ensure all products pass...More Details »
Item #: FDHD-ZG C9.25-355
Condition:
New
Price: $426.89
Description: USA Standard ring and pinion sets are designed to provide a quality and quiet gear set for OEM replacement. USA Standard's rigorous in-house quality testing and inspections ensure all products pass...More Details »
Item #: FDHD-ZG C9.25-390
Condition:
New
Price: $426.89