- Home »
- Catalog
Complete Offroad » 1990, Jeep, Cherokee
Products for:
- Year: 1990
- Make: Jeep
- Model: Cherokee
View Universal items for: 1990 Jeep Cherokee
Browse Products
Description: Dana 28 & Dana 30 pinion gear Thrust washer. Also fits AMC Model 35 with 1.560" side gear bore only.
Item #: FDHC-YSPTW-015
Condition:
New
Price: $10.89
Description: Dana 28, Dana 30, Model 35-Reverse, Dana 44, Dana 50 Inside axle snap ring (next to side gear).
Item #: FDHC-YSPSR-007
Condition:
New
Price: $7.89
Description: Dana 28, Dana 30, Dana 44, Dana 50 outer stub snap ring (inside locking hub).
Item #: FDHC-YSPSR-005
Condition:
New
Price: $8.89
Yukon Gear and Axle Dana 30 & Dana 44 Power Lok bolt, left h&, & 8.75" Chrysler & 55P.. - YSPBLT-052
Description: Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75" Chrysler & 55P.
Item #: FDHC-YSPBLT-052
Condition:
New
Price: $31.89
Description: Dana 30 & Dana 44 roll PIN, 0.235" DIA, for cross pin shaft.
Item #: FDHC-YSPXP-007
Condition:
New
Price: $9.89
Description: Dana 25, Dana 27, & Dana 30 side gear Thrust washer.
Item #: FDHC-YSPTW-014
Condition:
New
Price: $10.89
Description: Dana 44 & 9.25 Chrysler TracLoc clutch kit.
Item #: FDHC-YPKD44-PC-T/L
Condition:
New
Price: $129.89
Description: Dana 44 3.73 & Down Yukon Dura Grip Limited Slip, 30 Spline, Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Item #: FDHC-YDGD44-3-30-1
Condition:
New
Price: $820.89
Description: Dana 44 3.92 & Up Yukon Dura Grip Limited Slip, 30 Spline, Will Fit Applications with Independent Front Suspension with YSPSPR-001 Spring Kit
Item #: FDHC-YDGD44-4-30-1
Condition:
New
Price: $819.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 44 differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK D44
Condition:
New
Price: $127.89
Description: Replacement complete shim kit for Dana 44
Item #: FDHC-SK 706376
Condition:
New
Price: $50.89
Description: Replacement cover gasket. For Dana 44
Item #: FDHC-YCGD44
Condition:
New
Price: $12.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLD44-4-30
Condition:
New
Price: $966.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK D44-REAR
Condition:
New
Price: $359.89
Description: Dana 44 pinion gear standard Open.
Item #: FDHC-YPKD44-PG-01
Condition:
New
Price: $51.89
Description: Dana 44, GM55P & 8.2" GM pinion gear Thrust washer.
Item #: FDHC-YSPTW-011
Condition:
New
Price: $7.89
Description: Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.
Item #: FDHC-YPKD44-S-30
Condition:
New
Price: $208.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP FSD44-3-30DN
Condition:
New
Price: $369.89
NEW!
Description: 1310 U-bolts, 5/16" x 1-3/8" Dana 30, Dana 44, 8.2", 12P, 12T, VET, Model 20.
Item #: FDHC-YY UB-002
Condition:
New
Price: $29.89
Description: Replacement side gear thrust washer for Dana 44, Model 20, and Ford 8" & 9"
Item #: FDHC-YSPTW-013
Condition:
New
Price: $6.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D30R-354R
Condition:
New
Price: $548.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D30R-373R
Condition:
New
Please Call for Availability
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D30R-411R
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D30R-456R
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D30R-488R
Condition:
New
Price: $413.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D30R-513R
Condition:
New
Price: $413.89
Description: Inner axle dust shield for Dana 30
Item #: FDHC-YSPBF-037
Condition:
New
Price: $11.89
NEW!
Description: M35 3.54 & Up Yukon Dura Grip Limited Slip, 27 Spline Positraction Composite Clutches
Item #: FDHC-YDGM35-4-27-1
Condition:
New
Price: $714.89
Description: Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications.
Item #: FDHC-YP MINSD44-30
Condition:
New
Price: $188.89
Description: Model 20 & Model 35 axle stud 0.620" Dia. Shank.
Item #: FDHC-YSPSTUD-011
Condition:
New
Price: $8.89
Description: Model 35 & other screw-inaxle stud, 1/2" -20 x 1.5".
Item #: FDHC-YSPSTUD-010
Condition:
New
Price: $8.89
Description: Model 35 (standard Open & TracLoc) 8.25" Chrysler TracLoc cross pin bolt.
Item #: FDHC-YSPBLT-048
Condition:
New
Price: $14.89
Description: Model 35 1310 pinion yoke, U-bolt TYPE, with conversion seal. 3.219" snap ring span, 1.062" cap diameter. Outside snap ring.
Item #: FDHC-YY M35-1310-26U
Condition:
New
Model 35 1310 PINION YOKE , U-BOLT TYPE , WITH CONVERSION SEAL.
Price: $144.89
Description: Model 35 C/clip.
Item #: FDHC-YSPCC-003
Condition:
New
Price: $10.89
Description: Model 35 cover gasket.
Item #: FDHC-YCGM35
Condition:
New
Price: $12.89
Description: Model 35 roll pin for cross pin shaft, 0.190" DIA.
Item #: FDHC-YSPXP-015
Condition:
New
Price: $9.89
Description: Model 35 standard Open cross pin, BLT design, 0.685" DIA (NOT TracLoc).
Item #: FDHC-YSPXP-017
Condition:
New
Price: $31.89
Description: Model 35 standard Open cross pin, roll PIN design, 0.685" DIA (NOT TracLoc).
Item #: FDHC-YSPXP-014
Condition:
New
Price: $25.89
Description: Model 35 standard Open pinion gear Thrust washer, 0.685" ID, w/step
Item #: FDHC-YSPTW-021
Condition:
New
Price: $13.89
Description: Model 35 standard Open side gear Thrust washer. Fits 1.625" side gear bore only.
Item #: FDHC-YSPTW-022
Condition:
New
Price: $12.89
Description: Model 35 TracLoc & standard Open cross pin shaft, bolt design, 0.716" DIA.
Item #: FDHC-YSPXP-016
Condition:
New
Price: $35.89
Description: Model 35 TracLoc & standard Open pinion gear Thrust washer, 0.716" ID, NO STEP.
Item #: FDHC-YSPTW-019
Condition:
New
Price: $9.89
Description: O-ring for Dana 30 & Model 35 ZIP locker seal housing
Item #: FDHC-YZLAO-02
Condition:
New
Price: $11.89
Description: O-ring for Toyota & Dana 44 ZIP locker seal housing
Item #: FDHC-YZLAO-01
Condition:
New
Price: $11.89
Description: Outer stub thrust washer for Dana 30 & 44
Item #: FDHC-YSPTW-075
Condition:
New
Price: $10.89
Description: Outer stub dust shield for Dana 30 XJ, TJ, YJ. 2.738" I.D.
Item #: FDHC-YSPBF-022
Condition:
New
Price: $13.89
Description: Pin removal tool for Model 35 Zip Locker
Item #: FDHC-YZLAPRT-01
Condition:
New
Price: $12.89
Description: Replacement pinion nut for Model 20 & 35, Dana 30 JK, 44 JK front, Ford 10.25", 10.5" & some 9.75". 7/8-20 thread, 1 1/8 socket
Item #: FDHC-YSPPN-012
Condition:
New
Price: $12.89
Description: Power Lok Belleville clutch plate, splined
Item #: FDHC-YPKD44-PC-04
Condition:
New
Price: $31.89
NEW!
Description: Power Lok button kit for Dana 30, Dana 44 & Chrysler 8.75"
Item #: FDHC-YSPXP-062
Condition:
New
Price: $65.89
Description: Power Lok drive Belleville plate for Dana 44
Item #: FDHC-YPKD44-PC-01
Condition:
New
Price: $37.89
Description: Power Lok flat drive plate for Dana 44
Item #: FDHC-YPKD44-PC-02
Condition:
New
Price: $25.89
Description: Power Lok flat driven plate for Dana 44
Item #: FDHC-YPKD44-PC-03
Condition:
New
Price: $25.89
Description: Pump up kit, Zip Locker.
Item #: FDHC-YZLPUK
Condition:
New
Price: $170.89
NEW!
Description: Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.
Item #: FDHC-YMS99155
Condition:
New
Price: $166.89
NEW!
Description: Redline Synthetic "Shock Proof" Oil with Positraction Additive. 4 Quarts.
Item #: FDHC-OK 4-QRT-A
Condition:
New
Price: $136.89
NEW!
Description: Redline Synthetic "Shock Proof" Oil. 3 Quarts.
Item #: FDHC-OK 3-QRT
Condition:
New
Price: $93.89
NEW!
Description: Redline Synthetic "Shock Proof" Oil. 4 Quarts.
Item #: FDHC-OK 4-QRT
Condition:
New
Price: $134.89
Description: Replacement axle stud for Dana 44 & Model 35
Item #: FDHC-YSPSTUD-001
Condition:
New
Price: $8.89
NEW!
Description: This OE quality front brake rotor is a replacement for the rotor in Spin-Free locking hub conversion kits (YA WU-07).
Replacement brake rotor for YA WU-07 kit
Item #: FDHC-YP BR-03
Condition:
New
Price: $129.89