- Home »
- Catalog
Complete Offroad » 1989, Chevrolet / Chevy
Products for:
- Year: 1989
- Make: Chevrolet / Chevy
View Universal items for: 1989 Chevrolet / Chevy
Browse Products
Description: Spindle nut retainer, 2.030" I.D., 8 bent over tabs. This replaces Spicer part number 33733.
Item #: FDHC-YSPSP-007
Condition:
New
Price: $10.89
Description: Spindle nut washer for GM 10.5" 14 bolt truck, 2.160" I.D., 1 tab
Item #: FDHC-YSPSP-038
Condition:
New
Price: $34.89
Description: Spindle nut, 2.065" I.D., six slots. This replaces Spicer part number 36635.
Item #: FDHC-YSPSP-011
Condition:
New
Price: $30.89
Description: Standard open and Gov-Loc cross pin for 9.5" GM.
Item #: FDHC-YSPXP-034
Condition:
New
Price: $35.89
Description: Standard Open cross pin shaft for four pinion design for GM 14T.
Item #: FDHC-YSPXP-037
Condition:
New
Price: $101.89
Description: Standard open pinion gear thrust washer for 7.2" GM.
Item #: FDHC-YSPTW-038
Condition:
New
Price: $11.89
Description: Standard open side gear thrust washer for 7.2" GM.
Item #: FDHC-YSPTW-037
Condition:
New
Price: $20.89
Description: Standard open side gear thrust washer for 9.5" GM.
Item #: FDHC-YSPTW-033
Condition:
New
Price: $11.89
Description: Standard open side gear thrust washer for 8.5" GM.
Item #: FDHC-YSPTW-034
Condition:
New
Price: $18.89
Description: Standard Open and Gov-Loc cross pin bolt with M10x1.5 thread for 9.5" and 9.25" GM IFS
Item #: FDHC-YSPBLT-063
Condition:
New
Price: $21.89
Description: Standard open cross pin (0.795" diameter) for 8.5" GM. fits some Eaton positractions.
Item #: FDHC-YSPXP-033
Condition:
New
Price: $37.89
Description: Steel cover for Dana 60 standard rotation
Item #: FDHC-YP C5-D60-STD
Condition:
New
Price: $104.89
Description: Steel cover for Dana 70
Item #: FDHC-YP C5-D70
Condition:
New
Price: $129.89
Description: Steel cover for GM 10.5" 14 bolt truck
Item #: FDHC-YP C5-GM14T
Condition:
New
Price: $77.89
Description: Steel cover for GM 7.5" & 7.625"
Item #: FDHC-YP C5-GM7.5
Condition:
New
Price: $61.89
Description: Steel cover for GM 8.2", 8.5", & 8.6" rear. Threaded for fill plug. Plug and Gasket are included.
Item #: FDHC-YP C5-GM8.5
Condition:
New
Price: $121.89
Description: Steel cover for GM 9.5" Threaded for fill plug, fill plug not included.
Item #: FDHC-YP C5-GM9.5
Condition:
New
Price: $88,888.88
Description: Stub axle retaining clip snap ring for 8.25" GM IFS.
Item #: FDHC-YSPSR-013
Condition:
New
Price: $15.89
Description: Stub axle side seal for '98 and older GM 8.25" IFS. Two needed. Yukon Mighty seal.
Item #: FDHC-YMS710101
Condition:
New
Price: $22.89
Description: Super Carrier Shim kit for Ford 7.5", GM 7.5", 8.2" & 8.5"
Item #: FDHC-SK SS10
Condition:
New
Price: $42.89
Description: 9.5" GM differential carrier Supershim kit.
Item #: FDHC-SK SSGM9.5
Condition:
New
Price: $24.89
Description: Thrust washer for GM 9.25" IFS stub shaft.
Item #: FDHC-YSPTW-066
Condition:
New
Price: $41.89
Description: Thrust washer kit for GM 7.2" IFS stub shaft
Item #: FDHC-YSPTW-067
Condition:
New
Price: $44.89
Description: U/joint strap bolt for 14T, 7.5", and 8.5" GM.
Item #: FDHC-YSPBLT-074
Condition:
New
Price: $13.89
Description: U/joint strap for GM 14T. (One single strap)
Item #: FDHC-YY STR-007
Condition:
New
Price: $14.89
Description: ZIP locker front switch cover.
Item #: FDHC-YZLASC-F
Condition:
New
Price: $9.89
Description: Zip Locker solenoid valve.
Item #: FDHC-YZLASV-01
Condition:
New
Price: $92.89
Description: ZIP locker switch.
Item #: FDHC-YZLASW-01
Condition:
New
Price: $15.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLD60-3-30
Condition:
New
Price: $1,025.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLD60-3-35
Condition:
New
Price: $992.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLD60-3-40
Condition:
New
Price: $1,085.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLD60-4-30
Condition:
New
Price: $1,028.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLD60-4-35
Condition:
New
Price: $1,049.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLD60-4-40
Condition:
New
Price: $1,161.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLGM14T-30
Condition:
New
Price: $788.89
Description: The Yukon Grizzly Locker is the ultimate in mechanical locking differentials for street, off-road, and drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns.
Item #: FDHC-YGLGM8.5-3-30
Condition:
New
Price: $1,031.89
Description: Manufactured from high strength nodular iron Thick walled design Durable powder coat finish Magnetic drain plug High strength steel fasteners
Item #: FDHC-YHCC-D60
Condition:
New
Price: $303.89
Description: Yukon hardcore drive flange kit for Dana 60, 30 spline outer stubs. Non-engraved caps.
Item #: FDHC-YHC50004
Condition:
New
Price: $523.89
Description: Yukon hardcore drive flange kit for Dana 60, 30 spline outer stubs. Yukon engraved caps.
Item #: FDHC-YHC50003
Condition:
New
Price: $523.89
Description: Yukon hardcore drive flange kit for Dana 60, 35 spline outer stubs. Non-engraved caps.
Item #: FDHC-YHC50006
Condition:
New
Price: $493.89
Description: Yukon hardcore drive flange kit for Dana 60, 35 spline outer stubs. Yukon engraved caps.
Item #: FDHC-YHC50005
Condition:
New
Price: $493.89
Description: Drive flange, 30 spline inner, 55 spline outer.
Item #: FDHC-YHCDF-30-B
Condition:
New
Price: $143.89
Description: Drive flange, 35 spline inner, 55 spline outer.
Item #: FDHC-YHCDF-35
Condition:
New
Price: $143.89
Description: Bezel & selector replacement kit for Yukon Hardcore Locking Hubs. One side only.
Item #: FDHC-YHC72001
Condition:
New
Price: $180.89
Description: Yukon Hardcore Locking Hubs feature Chromoly internals and all steel construction for ultimate durability & strength. These hubs won’t disengage under high torque applications and default to the locked position in use.
Item #: FDHC-YHC71003
Condition:
New
Price: $399.89
Description: Yukon Hardcore Locking Hubs feature Chromoly internals and all steel construction for ultimate durability & strength. These hubs won’t disengage under high torque applications and default to the locked position in use.
Item #: FDHC-YHC71001
Condition:
New
Price: $395.89
Description: Yukon Hardcore Locking Hubs feature Chromoly internals and all steel construction for ultimate durability & strength. These hubs won’t disengage under high torque applications and default to the locked position in use.
Item #: FDHC-YHC70001
Condition:
New
Price: $685.89
Description: Yukon Hardcore Locking Hubs feature Chromoly internals and all steel construction for ultimate durability & strength. These hubs won’t disengage under high torque applications and default to the locked position in use.
Item #: FDHC-YHC70003
Condition:
New
Price: $670.89
Description: Yukon Hardcore Locking Hubs feature Chromoly internals and all steel construction for ultimate durability & strength. These hubs won’t disengage under high torque applications and default to the locked position in use.
Item #: FDHC-YHC70007
Condition:
New
Price: $596.89
Description: Yukon replacement hub for Dana 60 front, 5 x 5.5" pattern.
Item #: FDHC-YHC63907
Condition:
New
Price: $481.89
Description: Yukon replacement hub for Dana 60 front, 8 x 6.5" pattern.
Item #: FDHC-YHC63629
Condition:
New
Price: $491.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM7.5-456K
Condition:
New
Price: $457.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM9.5-A
Condition:
New
Price: $478.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM7.5-B
Condition:
New
Price: $295.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM7.2IFS-A
Condition:
New
Price: $455.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM8.25IFS-A
Condition:
New
Price: $406.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK D60-F
Condition:
New
Price: $459.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK D70-HD
Condition:
New
Price: $650.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM14T-B
Condition:
New
Price: $561.89
Description: Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. This kit uses Timken bearings and races along with high quality seals and small parts
Item #: FDHC-YK GM8.5-HD
Condition:
New
Price: $307.89