- Home »
- Catalog
Complete Offroad » 1987, F-350 1 Ton
Products for:
- Year: 1987
- Model: F-350 1 Ton
View Universal items for: 1987 F-350 1 Ton
Browse Products
Description: 10.25" Ford TracLoc pinion gear Thrust washer.
Item #: FDHC-YSPTW-020
Condition:
New
Price: $11.89
Description: 10.25" TracLoc (Ford case) Paper/Composite Lined clutch set, Positraction.
Item #: FDHC-YPKF10.25-PC-L
Condition:
New
Price: $259.89
Description: 1350 & 1410 U/joint U-bolts, 3/8" X 1-11/16", kit.
Item #: FDHC-YY UB-004
Condition:
New
Price: $18.89
Description: 20 long air line for Zip Locker.
Item #: FDHC-YZLAL-01
Condition:
New
Price: $28.89
Description: ABS exciter ring (tone ring) for 10.25" Ford. Must be rust free.
Item #: FDHC-YSPABS-015
Condition:
New
Price: $175.89
Description: Air line repair kit, ZIP locker.
Item #: FDHC-YZLAL-KIT
Condition:
New
Price: $48.89
Description: Axle seal for semi-floating Ford and Dodge with R1561TV bearing. Yukon Mighty seal.
Item #: FDHC-YMS710067
Condition:
New
Price: $22.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 60 differential. This kit contains carrier bearings, races and shims.
Item #: FDHC-CK D60
Condition:
New
Price: $186.89
Description: Chrome cover for 10.25" Ford.
Item #: FDHC-YP C1-F10.25
Condition:
New
Price: $64.89
Description: Dana 44, Dana 60, & 9.25" TracLoc clutch clip / guide
Item #: FDHC-YSPCG-001
Condition:
New
Price: $9.89
Description: Cross pin bolt with 5/16 x 18 thread for 10.25" Ford.
Item #: FDHC-YSPBLT-059
Condition:
New
Price: $8.89
Description: Crush Sleeve for Model 20, Ford 10.25", 10.5", 7.5", 8.8", 9 3/8", 9" & 9.75". .480" long.
Item #: FDHC-YSPCS-002
Condition:
New
Price: $10.89
Description: Replacement pinion nut washer for Dana 44 JK, 60, 70U, '08 & newer Ford 10.5" & Nissan Titan rear.
Item #: FDHC-YSPPN-030
Condition:
New
Price: $6.89
Description: Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225" DIA, for X/P shaft, 1.87" LNG.
Item #: FDHC-YSPXP-022
Condition:
New
Price: $10.89
Description: Dana 60 & Dana 61 TracLoc clutch set.
Item #: FDHC-YPKD60-PC-T/L
Condition:
New
Price: $264.89
Description: Dana 60 & Dana 70 Power Lok clutch set (steel & fiber).
Item #: FDHC-YPKD60-PC-P/L
Condition:
New
Price: $172.89
Description: Dana 60 & Dana 70 Power Lok cross pin shaft (TWO needed).
Item #: FDHC-YSPXP-010
Condition:
New
Price: $162.89
Description: Dana 60 Drive Flange Cap, Yukon Engraved
Item #: FDHC-YP DFC-LG-Y
Condition:
New
Price: $134.89
Description: Dana 60 pinion gear Thrust washer, standard Open & TracLoc (also 8.75" Chrysler STD) Dana 70 2PC.
Item #: FDHC-YSPTW-017
Condition:
New
Price: $8.89
Description: 3/8" cover bolt, Dana 60, Dana 70 & Dana 80.
Item #: FDHC-YSPBLT-053
Condition:
New
Price: $7.89
Description: Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.
Item #: FDHC-YY STR-003
Condition:
New
Price: $28.89
Description: U/joint strap kit, 10.25", 9.5", Dana 60, Dana 70, 1350 & 1410.
Item #: FDHC-YY STR-002
Condition:
New
Price: $19.89
Description: Dana 70 & Dana 80 pinion gear Thrust washer.
Item #: FDHC-YSPTW-018
Condition:
New
Price: $10.89
Description: Dana 70 & Dana 80 standard Open cross pin shaft, one piece case.
Item #: FDHC-YSPXP-019
Condition:
New
Price: $62.89
Description: Drive Flange Cap for Dana 60
Item #: FDHC-YP DFC-LG-B
Condition:
New
Price: $134.89
Description: Finned aluminum cover for Ford 10.5", '08 & Up
Item #: FDHC-YP C5-F10.5
Condition:
New
Price: $155.89
Description: 10.25" & 10.5" cover gasket.
Item #: FDHC-YCGF10.25
Condition:
New
Price: $14.89
Description: Ford 10.25" C/clip.
Item #: FDHC-YSPCC-005
Condition:
New
Price: $23.89
Description: Full floating axle seal for 10.25" Ford. Yukon Mighty seal.
Item #: FDHC-YMS370047A
Condition:
New
Price: $74.89
Description: Grease retainer for Dana 60 king-pin
Item #: FDHC-YP KP-009
Condition:
New
Price: $11.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D70-354
Condition:
New
Price: $811.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D70-373
Condition:
New
Price: $790.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D70-411
Condition:
New
Price: $584.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D70-456
Condition:
New
Price: $584.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D70-456T
Condition:
New
Price: $676.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D70-488
Condition:
New
Price: $584.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D70-513
Condition:
New
Price: $584.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D70-717
Condition:
New
Price: $756.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.25-355L
Condition:
New
Price: $441.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.25-373L
Condition:
New
Long yoke required on 92 and older applications
Price: $498.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.25-411L
Condition:
New
Long yoke required on 92 and older applications
Price: $498.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.25-430L
Condition:
New
Long yoke required on 92 and older applications
Price: $517.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.25-456L
Condition:
New
Long yoke required on 92 and older applications
Price: $517.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.25-488L
Condition:
New
Long yoke required on 92 and older applications
Price: $427.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.25-513L
Condition:
New
Long yoke required on 92 and older applications
Price: $479.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG F10.25-538L
Condition:
New
Long yoke required on 92 and older applications
Price: $498.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60R-430R-T
Condition:
New
Price: $398.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60R-456R-T
Condition:
New
Price: $452.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60R-488R-T
Condition:
New
Price: $452.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60R-513R-T
Condition:
New
Price: $477.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60R-538R-T
Condition:
New
Price: $477.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60R-354R
Condition:
New
Price: $723.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60R-373R
Condition:
New
Price: $574.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60R-411R
Condition:
New
Price: $617.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60R-488R
Condition:
New
Price: $618.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60R-538R
Condition:
New
Price: $477.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60R-538R-35
Condition:
New
Price: $745.89
Description: Replacement king-pin kit for Dana 60(1) side (pin, bushing, seals, bearings, spring, cap). This is a replacement for Dana Spicer part number 706395-R.
Item #: FDHC-YP KP-001
Condition:
New
Price: $201.89
Description: Left hand spindle nut for Ford 10.25", self ratcheting type.
Item #: FDHC-YSPSP-035
Condition:
New
Price: $137.89
Description: Restore the precise steering control of your vehicle by replacing its worn and failing ball joints with durable Yukon units. Yukon ball joints are constructed from high-quality materials and engineered to meet or exceed OE specs.
Item #: FDHC-YSPBJ-007
Condition:
New
Price: $133.89