- Home »
- Catalog
Complete Offroad » Chevrolet
Products for:
- Make: Chevrolet
View Universal items for: Chevrolet
Browse Products
Description: Finned aluminum cover for Dana 80
Item #: FDHC-YP C5-D80-A
Condition:
New
Price: $233.89
Description: AAM 11.5" Finned aluminum cover for Dodge & GM
Item #: FDHC-YP C5-C11.5
Condition:
New
Price: $403.89
Description: Gasket, 63 - 79 CI Corvette.
Item #: FDHC-YCGGMVET-CI
Condition:
New
Price: $16.89
Description: 14T cover gasket.
Item #: FDHC-YCGGM14T
Condition:
New
Price: $16.89
Description: 12P cover gasket.
Item #: FDHC-YCGGM12P
Condition:
New
Price: $14.89
Description: GM 12 bolt passenger car crush sleeve. Approx. 2.340" long.
Item #: FDHC-YSPCS-021
Condition:
New
Price: $18.89
Description: 12T cover gasket.
Item #: FDHC-YCGGM12T
Condition:
New
Price: $14.89
Description: GM 12 bolt truck crush sleeve, 2.350" long.
Item #: FDHC-YSPCS-022
Condition:
New
Price: $14.89
Description: GM 7.2" crush sleeve. Approx. 1.610" long.
Item #: FDHC-YSPCS-024
Condition:
New
Price: $17.89
Description: GM 7.2" IFS Ring Gear bolt. 7/16" x 20.
Item #: FDHC-YSPBLT-018
Condition:
New
Price: $11.89
Description: GM 7.5" standard Open side gear thrust washer.
Item #: FDHC-YSPTW-051
Condition:
New
Price: $7.89
Description: GM 8.2" crush sleeve w/OEM ring & pinion (NOT AFTERMARKET ring & pinion). 2.470" long.
Item #: FDHC-YSPCS-020
Condition:
New
Price: $16.89
Description: 8.25IFS GM Right hand , 07-11 28Spline STUB AXLE SHAFT , 14.92" w/PILOT , 4WD (not AWD) .
Item #: FDHC-YA G15801499
Condition:
New
Price: $339.89
Description: 8.25IFS RIGHT HAND EXTREME INNER DISCONNECT STUB AXLE, '88-'08 GM 4WD FRONT, w/ needle bearing.
Item #: FDHC-YA GM19121908
Condition:
New
Price: $151.89
Description: GM 8.25" IFS case gasket, 2007 & up
Item #: FDHC-YCGGM8.25IFS
Condition:
New
Price: $39.89
Description: GM 8.25" IFS side adjuster, '07 & up
Item #: FDHC-YSPSA-010
Condition:
New
Price: $89.89
Description: 8.25IFS 07 & up GM side bearing adjuster lock ring.
Item #: FDHC-YSPSA-011
Condition:
New
Price: $38.89
Description: GM 9.25" IFS side adjuster lock, '11 & up.
Item #: FDHC-YSPSA-013
Condition:
New
Price: $40.89
Description: 9.25IFS GM 11 & up side bearing adjuster.
Item #: FDHC-YSPSA-012
Condition:
New
Price: $67.89
Description: GM 9.25" IFS snap ring for outer stub.
Item #: FDHC-YSPSR-012
Condition:
New
Price: $10.89
Description: Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades.
Item #: FDHC-CK GM9.5
Condition:
New
Price: $228.89
Description: GM 9.5" ring gear bolt. 12mm x 1.5.
Item #: FDHC-YSPBLT-017
Condition:
New
Price: $7.89
Description: GM 9.76" & 2014 & up GM 9.5" 12 bolt cover gasket
Item #: FDHC-YCGGM9.5-B
Condition:
New
Price: $42.89
Description: Yukon Gear & Axle manufactures a full line of top-quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers, seals, and...More Details »
Item #: FDHC-YSPBLT-080
Condition:
New
Price: $9.89
Description: GM side gear spacer sleeve for GM 9.25" IFS
Item #: FDHC-YSPTW-074
Condition:
New
Price: $41.89
Description: Grease retainer for Dana 60 king-pin
Item #: FDHC-YP KP-009
Condition:
New
Price: $13.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-354
Condition:
New
Price: $748.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-373
Condition:
New
Price: $726.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60V-409
Condition:
New
Price: $1,135.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-411
Condition:
New
Price: $516.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-430
Condition:
New
Price: $617.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-456
Condition:
New
Price: $516.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-488
Condition:
New
Price: $541.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-513
Condition:
New
Price: $516.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-538
Condition:
New
Price: $516.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-586
Condition:
New
Price: $625.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-617
Condition:
New
Price: $614.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG D60-717
Condition:
New
Price: $672.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG DS135-488
Condition:
New
Price: $1,930.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM12P-411T
Condition:
New
Price: $569.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GMVET-411T
Condition:
New
Price: $860.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM12P-373-4
Condition:
New
Price: $590.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM9.76-342
Condition:
New
Price: $697.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM9.76-373
Condition:
New
Price: $697.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-342
Condition:
New
Price: $933.89
Description: Yukon engineers use state-of-the-art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish of our gear sets meet exacting...More Details »
Item #: FDHC-YG GM11.5-373
Condition:
New
Price: $876.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-411
Condition:
New
Price: $887.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-444
Condition:
New
Price: $933.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-456
Condition:
New
Price: $1,008.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-488
Condition:
New
Price: $933.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-513
Condition:
New
Price: $734.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-538
Condition:
New
Price: $734.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM12P-373
Condition:
New
Price: $436.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM12P-390
Condition:
New
Price: $565.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM12P-411
Condition:
New
Price: $444.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM12P-456
Condition:
New
Price: $696.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM12P-308
Condition:
New
Price: $501.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM12P-331
Condition:
New
Price: $501.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM12P-342
Condition:
New
Price: $436.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM12P-355
Condition:
New
Price: $436.89