- Home »
- Catalog
Complete Offroad » Chrysler 11.5"
Products for:
- Axle Model: Chrysler 11.5"
View Universal items for: Chrysler 11.5"
Browse Products
Items 1-60 of 92
- Page 1 of 2
- Next
Description: 11.5" AAM GM & Chrysler front pinion bearing
Item #: TK NP457992
Condition:
New
Price: $39.35
Description: 11.5" AAM GM & Chrysler front pinion race
Item #: TK NP926068
Condition:
New
Price: $21.67
Description: 1350 to 1410 conversion u/joint.
Item #: DS U-1435
Condition:
New
Price: $40.90
Description: 1410 Dana Spicer Lifetime Series U/Joint. 4.188" span ring span. 1.188" cap diameter. Outside snap ring.
Item #: DS U-801
Condition:
New
Price: $47.64
Description: 1410 U/Joint with zerk fitting. 4.188" snap ring span, 1.118" cap diameter. Outside snap ring.
Item #: DS U-160
Condition:
New
Price: $35.65
Description: 1480 Dana Spicer Lifetime Series U/Joint. 4.188" span ring span. 1.375" cap diameter. Outside snap ring. This U/Joint is an axle U/Joint.
Item #: DS U-803
Condition:
New
Price: $64.29
Description: 1480 U/Joint with zerk fitting. 4.188" snap ring span, 1.375" cap diameter. Outside snap ring. This U/Joint is for driveline use only.
Item #: DS U-188
Condition:
New
Price: $45.42
Description: 4340 Chrome Moly axle shaft for Chrysler 10.5" & 11.5" rear. (WC11.5-38-40)
Item #: WC11.5-38-40
Condition:
New
Please Call for Availability
Description: ABS Tone ring for Chrysler 10.5", '05 & up w/ Electric Locker
Item #: FDHC-YSPABS-002
Condition:
New
Price: $181.89
Description: ARB Air Locker Differential Shaft Spline 30 Ratio All
Item #: BHWQ-RD139
Condition:
New
Please Call for Availability
Description: 1 Ounce, Gear Marking Compound. Good for all gear sets.
Item #: GM 1052351
Condition:
New
Price: $35.00
Description: Rear pinion bearing for 2014 & up AAM 11.5" & 11.8"
Item #: TK NP848872
Condition:
New
Price: $93.90
Description: Replacement pinion bearing for Dana 80, 4.375" O.D.
Item #: TK NP516549
Condition:
New
Price: $87.66
Description: Replacement pinion race for Dana 80, 4.735" O.D.
Item #: TK NP673386
Condition:
New
Price: $53.44
Description: Pinion and axle seal puller. No return.
Item #: W1219
Condition:
New
Price: $19.99
Description: This kit uses Koyo bearings and races and high-quality small parts. USA Standard Gear does extensive research for each application to make sure your kit arrives with all the correct parts needed to install your ring and pinion gear set.
Item #: FDHD-ZBKGM11.5-A
Condition:
New
Price: $333.89
Description: USA Standard Gear Master Overhaul Kits provide all of the necessary parts for a differential overhaul in one simple part number. Save time and money, and get the exact parts you need for your specific installation.
Item #: FDHD-ZK GM11.5
Condition:
New
Price: $542.89
Description: USA Standard Gear Master Overhaul Kits provide all of the necessary parts for a differential overhaul in one simple part number. Save time and money, and get the exact parts you need for your specific installation.
Item #: FDHD-ZK GM11.5-B
Condition:
New
Price: $577.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure products pass dimensional, material, and fitment testing.
Item #: FDHD-ZG GM11.5-373
Condition:
New
Price: $554.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure products pass dimensional, material, and fitment testing.
Item #: FDHD-ZG GM11.5-411
Condition:
New
Price: $570.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure products pass dimensional, material, and fitment testing.
Item #: FDHD-ZG GM11.5-456
Condition:
New
Price: $455.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure products pass dimensional, material, and fitment testing.
Item #: FDHD-ZG GM11.5-488
Condition:
New
Price: $520.89
Description: Make quick work of the often-tedious removal of bearing races. Brass construction is corrosion resistant and wont chip or shatter. No returns.
Item #: FDHC-YT P21
Condition:
New
Price: $113.89
Sale: $50.00
Save: 56%
Save: $63.89
Description: Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. High quality alloys and the best in heat-treating...More Details »
Item #: FDHC-YA C11.5-38-40
Condition:
New
Please Call for Availability
Description: Yukon Gear and Axle offers an extensive line of general replacement and high performance axles for passenger car, truck and SUV applications. High quality alloys and the best in heat-treating...More Details »
Item #: FDHC-YA C11.5-30-40
Condition:
New
Please Call for Availability
Description: Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit.
Item #: FDHC-BK GM11.5
Condition:
New
Price: $721.89
Description: Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit.
Item #: FDHC-BK GM11.5-B
Condition:
New
Price: $817.89
Description: Bearing race drive for Ford 10.25" and 10.5 axle bearing. (TK 3920). No return.
Item #: FDHC-YT BD-3920
Condition:
New
Price: $195.89
Description: This precision-machined driver is designed to accurately install bearing races. No returns.
Item #: FDHC-YT BD-LM104911
Condition:
New
Price: $197.89
Description: This 21-piece bearing race driver set will work on a vast majority of differentials. (Box weight: 140 lbs) No returns.
Item #: FDHC-YT BDSET
Condition:
New
Price: $1,538.89
Sale: $1,250.00
Save: 19%
Save: $288.89
Description: Yukon high-performance axles are built with high-strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature induction coil heat treating to create an...More Details »
Item #: FDHC-YA WC11.5-30-40
Condition:
New
Price: $615.89
Description: Yukon high-performance axles are built with high-strength 4340 chromoly, use superior production methods that include cold roll formed splines, and feature induction coil heat treating to create an...More Details »
Item #: FDHC-YA WC11.5-38-40
Condition:
New
Price: $658.89
Description: 10.5" & 11.5" GM & Dodge pinion seal. Yukon Mighty seal.
Item #: FDHC-YMSG1015
Condition:
New
Please Call for Availability
Description: 11.5 GM spanner adjuster nut.
Item #: FDHC-YSPSA-007
Condition:
New
Price: $46.89
Description: Yukon gear-type helical LSDs use floating helical-cut worm gears that lock the torque down when wheel slippage occurs, transferring torque to the tire with the best traction in a smooth progressive manner.
Item #: FDHC-YP PC11.5-HELIC
Condition:
New
Price: $2,050.89
Description: 11.5" GM & Chrysler crush sleeve. Approx. 0.935" long.
Item #: FDHC-YSPCS-015
Condition:
New
Price: $72.89
Description: Yukon Dura Grip is a positraction limited slip differential that provides smooth yet aggressive traction, giving you the confidence and performance you need across a wide variety of terrains.
Item #: FDHC-YDGGM11.5-30-1
Condition:
New
Price: $1,564.89
Description: 11.5" GM & Chrysler pinion nut
Item #: FDHC-YSPPN-017
Condition:
New
Price: $28.89
Description: 11.5" GM standard Open cross pin shaft.
Item #: FDHC-YSPXP-041
Condition:
New
Price: $50.89
Description: 11.5" GM standard Open pinion gear Thrust washer.
Item #: FDHC-YSPTW-050
Condition:
New
Price: $18.89
Description: 11.5" GM standard Open side gear Thrust washer.
Item #: FDHC-YSPTW-049
Condition:
New
Price: $32.89
Description: 11.5AAM wheel seal. Yukon Mighty Seal
Item #: FDHC-YMS710564
Condition:
New
Price: $40.89
Description: 1480 U-bolt kit.
Item #: FDHC-YY UB-005
Condition:
New
Price: $50.89
Description: Chrysler 11.5AAM DRW wheel seal.
Item #: FDHC-YMS710563
Condition:
New
Price: $79.89
Description: AAM 11.5" Finned aluminum cover for Dodge & GM
Item #: FDHC-YP C5-C11.5
Condition:
New
Price: $448.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C11.5B-342B
Condition:
New
Price: $597.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG C11.5B-373B
Condition:
New
Price: $597.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-342
Condition:
New
Price: $849.89
Description: Yukon engineers use state-of-the-art design, advanced heat-treating techniques, and leading-edge quality testing processes to ensure the structure and surface finish of our gear sets meet exacting...More Details »
Item #: FDHC-YG GM11.5-373
Condition:
New
Price: $797.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-411
Condition:
New
Price: $807.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-444
Condition:
New
Price: $849.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-456
Condition:
New
Price: $917.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-488
Condition:
New
Price: $849.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-513
Condition:
New
Price: $668.89
Description: Yukon Gear & Axle high performance ring & pinions set the standard for quality. Yukon designed the gear tooth surface finish to reduce friction and heat, and use high grade steel in both the ring & pinion, with fitment designed to OEM spec
Item #: FDHC-YG GM11.5-538
Condition:
New
Price: $668.89
Description: Pinion depth shims for Ford 9.75"
Item #: FDHC-SK 20975
Condition:
New
Price: $26.89
Description: Replacement Carrier shim kit for Dana 60, 70, 70HD, 70U & 80
Item #: FDHC-SK 30276
Condition:
New
Price: $14.89
Description: Replacement extra large clamshells for use with Yukon Carrier Bearing Puller Sets: YT P20 & YT P22. Fits Dana 70HD, Dana 80, AAM 11.5", Ford 9.75", Ford 10.25" & Ford 10.5".
Item #: FDHC-YT P12
Condition:
New
Price: $205.89
Items 1-60 of 92
- Page 1 of 2
- Next