ICON Vehicle Dynamics 00-05 FORD EXCURSION 4.5" SUSPENSION SYSTEM - K44000-99

This 4.5" system is designed to lift your Ford Excursion 4.5" in front to provide room for 35” tires. This system drops your stock springs 4.5", which allows for 4.5" of lift while maintaining the stock spring rate. This system comes with a 1.75" bump stop spacer to prevent spring fatigue during the suspension cycle. Also included in this kit is 5” rear block kit, with 17” U-bolts for a leveled stance. This system is the ideal for all Excursion’s.

Increased wheel travelDurable powder coat finishLess body-roll than stock truckIsolates Stock springs for Factory Like Ride QualityNo change in towing capacityNo drive shaft modifications needed100% Bolt-on system - no drilling, cutting or welding necessary for install

Bushings Included: Yes
California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Grade Type: Performance
Leaf Spring Bracket Color: Black
Leaf Spring Bracket Material: Steel
Leaf Spring Bracket Mount Hole Quantity: 1
Maximum Lift: 4.5
Mounting Hardware Included: Yes
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.25” Backspace / 6mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5” Backspace / 6mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.25” Backspace / 6mm Offset
Shocks Included: NO
OEM Wheels & Tires Fitment: Yes;Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.00” Backspace / 6mm Offset;Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.25” Backspace / 6mm Offset;Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.25” Backspace / 6mm Offset;Recommended Aftermarket Tires: 35" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.);APPLICATION NOTE #3: No Front Driveshaft Modification Needed. Stock Driveshaft Is Fully Functional.;APPLICATION NOTE #5: 2001-2004 3” And 4.5” Hanger Kits Come Complete With A New Replacement Front Cross-Member. This Crossmember Replaces The Factory Crossmember;APPLICATION NOTE #17: These Are Stand-Alone Kits And Are Not To Be Used In Conjunction With Any Other Aftermarket Kits