Home - Return to Previous Page
ICON Vehicle Dynamics 07-18 GM 1500 1-3" STAGE 1 SUSPENSION SYSTEM - K73001
FRDK-K73001
2007-2018 GM 1500 1-3" LIFT STAGE 1 SUSPENSION SYSTEM
Pricing:
$2,140.85
Description
ICON Vehicle Dynamics 2007-2018 GM Silverado/Sierra 1500 suspension systems are designed to dramatically increase the on and off-road ride quality. ICON engineers’ primary focus is to increase wheel travel and damping ability, which translates into outstanding vehicle control and ride quality both on and off-road. With wheel travel and ride quality in mind, ICON engineers researched each component of the GM platform’s suspension and addressed any areas where performance could be extracted. The Stage 1 system includes vehicle-specific tuned 2.5 coilover shocks featuring an internal reservoir for exceptional cooling properties and ICON-engineered Eibach coil springs for superior vehicle “feel” through the range of travel. These coilovers are also height adjustable from 1-3” allowing the use of larger, more aggressive wheel and tire combinations. ICON 2.0 Aluminum Series monotube rear shocks utilize a vehicle-specific valving that balances the performance of the truck from front to rear. The ICON Vehicle Dynamics GM Silverado/Sierra 1500 Stage 1 suspension system is an excellent choice for those drivers looking to enhance the capabilities of their pickup on the road as well as in the dirt.
Fits 2WD and 4WD modelsIncreased wheel travel and ride quality over stock with no change in towing capacityVehicle specific tuned front and rear shocks for superior shock damping and controlAdjustable coilovers allow for f 1-3" of front lift height over stock6061 Aircraft grade aluminum CNC machined componentsCorrosion resistant CAD plated coilover shock body with 7/8" shaftHigh strength alloy CNC machined lower bar pinFK rod end bearings for extended longevity and minimal deflection2.0 Aluminum Series rear IFP shocks with 5/8" shock shafts
Add-On Part: 198000 - 2 PIN COILOVER SPANNER WRENCH KIT
Add-On Part: 198001 - BILLET SPANNER WRENCH KIT
Bushings Included: NO
California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Grade Type: Performance
Maximum Lift: 3
Mounting Hardware Included: Yes
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.)
Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5” Backspace / 0mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 4.75” Backspace / 0mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5” Backspace / 0mm Offset
Shocks Included: Yes
Spring Color: Black
Spring Material: Steel
OEM Wheels & Tires Fitment: Yes;Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 4.75” Backspace / 0mm Offset;Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.00” Backspace / 0mm Offset;Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.00” Backspace / 0mm Offset;Recommended Aftermarket Tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.);APPLICATION NOTE #48: Slight Modifications To Factory Shock Mounts May Be Required;APPLICATION NOTE #55: Shocks Are Fully Serviceable. Coilover Heights Indicated Are For A Stock Equipped Vehicle;APPLICATION NOTE #83: Trimming Of The Upper Control Arm Stop Required Or Down Travel Will Be Limited By Upper Arm Stop;TECH NOTE: Not compatible with models equipped Magnetic Ride Control;TECH NOTE: Included rear shocks are compatible with 0-2" of rear lift on most models;TECH NOTE: Not recommended for Hybrid models;Ships in multiple boxes
Fits 2WD and 4WD modelsIncreased wheel travel and ride quality over stock with no change in towing capacityVehicle specific tuned front and rear shocks for superior shock damping and controlAdjustable coilovers allow for f 1-3" of front lift height over stock6061 Aircraft grade aluminum CNC machined componentsCorrosion resistant CAD plated coilover shock body with 7/8" shaftHigh strength alloy CNC machined lower bar pinFK rod end bearings for extended longevity and minimal deflection2.0 Aluminum Series rear IFP shocks with 5/8" shock shafts
Add-On Part: 198000 - 2 PIN COILOVER SPANNER WRENCH KIT
Add-On Part: 198001 - BILLET SPANNER WRENCH KIT
Bushings Included: NO
California Proposition 65: WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.
Grade Type: Performance
Maximum Lift: 3
Mounting Hardware Included: Yes
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.)
Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5” Backspace / 0mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 4.75” Backspace / 0mm Offset
Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5” Backspace / 0mm Offset
Shocks Included: Yes
Spring Color: Black
Spring Material: Steel
OEM Wheels & Tires Fitment: Yes;Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 4.75” Backspace / 0mm Offset;Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.00” Backspace / 0mm Offset;Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.00” Backspace / 0mm Offset;Recommended Aftermarket Tires: 33" x 11.50" (Larger tires may fit but fender trimming and modifications will be required.);APPLICATION NOTE #48: Slight Modifications To Factory Shock Mounts May Be Required;APPLICATION NOTE #55: Shocks Are Fully Serviceable. Coilover Heights Indicated Are For A Stock Equipped Vehicle;APPLICATION NOTE #83: Trimming Of The Upper Control Arm Stop Required Or Down Travel Will Be Limited By Upper Arm Stop;TECH NOTE: Not compatible with models equipped Magnetic Ride Control;TECH NOTE: Included rear shocks are compatible with 0-2" of rear lift on most models;TECH NOTE: Not recommended for Hybrid models;Ships in multiple boxes
Details
- FRDK-K73001
- FRDK-K73001
- Icon Vehicle Dynamics
- New
Shipping Information
- Item Requires Shipping
- 55.0 lbs.
- W13.0000” x H7.0000” x L26.0000”
Customer Reviews
Total Reviews (0)
You must login to post a review.
Write the First Review!