- Home »
- Catalog
Complete Offroad » 1971, Chevrolet / Chevy
Products for:
- Year: 1971
- Make: Chevrolet / Chevy
View Universal items for: 1971 Chevrolet / Chevy
Browse Products
Description: DANA SPICER
4)1.184" caps
3.63" cap to cap
Item #: DS U-178
Condition:
New
Price: $31.74
Description: DANA SPICER FORGED U-JOINT FOR THE DANA 60, REPLACES THE OLDER 5-332X
4)1.375" caps
4.25" cross
NON GREASABLE
Item #: DS U-806
Condition:
New
Price: $74.84
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W48208
Condition:
New
Price: $176.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W48210
Condition:
New
Price: $275.89
Description: This kit uses Koyo bearings and races and high-quality small parts. USA Standard Gear does extensive research for each application to make sure your kit arrives with all the correct parts needed to install your ring and pinion gear set.
Item #: FDHD-ZBKD44
Condition:
New
Please Call for Availability
Description: USA Standard Gear Master Overhaul Kits provide all of the necessary parts for a differential overhaul in one simple part number. Save time and money, and get the exact parts you need for your specific installation.
Item #: FDHD-ZK D44-REAR
Condition:
New
Price: $234.89
Description: USA Standard Gear driveshafts are built new from the ground up, not remanufactured, to provide decades of everyday use. All driveshafts arrive fully assembled and ready to install to get your vehicle back on the road quickly.
Item #: FDHD-ZDS9333
Condition:
New
Not Available
Price: $543.89
Description: The Spartan Locker delivers reliable, 100% lockup traction at a low cost. This heavy-duty cross pin shaft is engineered and manufactured to the highest standards. Measures .808" outside diameter.
Item #: FDHD-SL XP-GM12
Condition:
New
Price: $48.89
Description: The Spartan Locker delivers reliable, 100% lockup traction at a low cost. This heavy-duty cross pin shaft is engineered and manufactured to the highest standards. Measures .748" outside diameter.
Item #: FDHD-SL XP-D44
Condition:
New
Please Call for Availability
Description: The Spartan Locker delivers reliable, 100% lockup traction at a low cost. This heavy-duty cross pin shaft is engineered and manufactured to the highest standards. Measures .872" outside diameter.
Item #: FDHD-SL XP-D60
Condition:
New
Price: $48.89
Description: USA Standard axle for '65-'69 4WD GM truck. 12 bolt differential, 30 spline.
Item #: FDHD-ZA G3893605
Condition:
New
Price: $228.89
Description: USA Standard axle for '71-'81 2WD GM Truck. 12 bolt differential, 31 7/16", 5 lug, 30 spline.
Item #: FDHD-ZA G14071751
Condition:
New
Price: $224.89
Description: USA Standard axle shaft for '70-'81 4WD GM truck. 12 bolt differential, 31 7/16", 6 lug, 30 spline.
Item #: FDHD-ZA G14071750
Condition:
New
Price: $171.89
Description: This kit uses Koyo bearings and races and high-quality small parts. USA Standard Gear does extensive research for each application to make sure your kit arrives with all the correct parts needed to install your ring and pinion gear set.
Item #: FDHD-ZBKD44-REAR
Condition:
New
Price: $171.89
Description: This kit uses Koyo bearings and races and high-quality small parts. USA Standard Gear does extensive research for each application to make sure your kit arrives with all the correct parts needed to install your ring and pinion gear set.
Item #: FDHD-ZBKD60-F
Condition:
New
Price: $286.89
Description: This kit uses Koyo bearings and races and high-quality small parts. USA Standard Gear does extensive research for each application to make sure your kit arrives with all the correct parts needed to install your ring and pinion gear set.
Item #: FDHD-ZBKD60-R
Condition:
New
Price: $234.89
Description: This kit uses Koyo bearings and races and high-quality small parts. USA Standard Gear does extensive research for each application to make sure your kit arrives with all the correct parts needed to install your ring and pinion gear set.
Item #: FDHD-ZBKD70-HD-A
Condition:
New
Price: $380.89
Description: This kit uses Koyo bearings and races and high-quality small parts. USA Standard Gear does extensive research for each application to make sure your kit arrives with all the correct parts needed to install your ring and pinion gear set.
Item #: FDHD-ZBKGM12T
Condition:
New
Price: $169.89
Description: Fits '69-'69-1/2 Blazer & Jimmy front. 23 1/4" long from center of u/joint caps.
Item #: FDHD-ZDS9320
Condition:
New
Not Available
Price: $413.72
Description: Fits '66-'69-1/2 GM K10 & K15 front. 23 1/4" long from center of u/joint caps.
Item #: FDHD-ZDS9320A
Condition:
New
Not Available
Price: $354.77
Description: Fits '66-'69-1/2 GM K20 & K25 front. 23 1/4" long from center of u/joint caps.
Item #: FDHD-ZDS9320B
Condition:
New
Not Available
Price: $354.77
Description: Fits late '69-'72 GM K10 & K15 front. 26 3/32" long from center of u/joint caps.
Item #: FDHD-ZDS9321A
Condition:
New
Not Available
Price: $444.96
Description: Fits late '69-'72 GM K20 & K25 front. 26 3/32" long from center of u/joint caps.
Item #: FDHD-ZDS9321B
Condition:
New
Not Available
Price: $444.96
Description: Fits '73-'77 GM K10 & K15 with 5.7L engine & automatic transmission. 27 7/8" long from center of u/joint caps.
Item #: FDHD-ZDS9333A
Condition:
New
Not Available
Price: $354.77
Description: Fits 1977 GM K20 & K25 front with 5.7L engine, automatic transmission & 7200lb or 8600lb GVW. 27 7/8" long from center of u/joint caps.
Item #: FDHD-ZDS9333B
Condition:
New
Not Available
Price: $354.77
Description: Fits '73-'76 GM K20 & K25 front with 5.7L engine, automatic transmission & 7200lb GVW. 27 7/8" long from center of u/joint caps.
Item #: FDHD-ZDS9333C
Condition:
New
Not Available
Price: $354.77
Description: Fits '73-'76 GM K20 & K25 front with 5.7L engine, automatic transmission & 8600lb GVW. 27 7/8" long from center of u/joint caps.
Item #: FDHD-ZDS9333D
Condition:
New
Not Available
Price: $354.77
Description: Fits '73-'77 GM K10 & K15 front with 250 engine, manual transmission & yoke at the transfer case. 24 5/8" long from center of u/joint caps.
Item #: FDHD-ZDS9334A
Condition:
New
Not Available
Price: $354.77
Description: Fits 1977 GM K20 & K25 front with manual transmission, yoke at transfer case & either 7200lb or 8600lb GVW. 24 5/8" long from center of u/joint caps.
Item #: FDHD-ZDS9334D
Condition:
New
Not Available
Price: $354.77
Description: Fits '73-'76 GM K20 & K25 front with 250 engine, manual transmission, yoke at transfer case & either 7200lb or 8600lb GVW. 24 5/8" long from center of u/joint caps.
Item #: FDHD-ZDS9334E
Condition:
New
Not Available
Price: $354.77
Description: Fits '73-'76 GM K20 & K25 front with 250 engine, manual transmission, yoke at transfer case & 8600lb GVW. 24 5/8" long from center of u/joint caps.
Item #: FDHD-ZDS9334F
Condition:
New
Not Available
Price: $354.77
Description: Fits '77-'80 GM K10 & K15 front with automatic transmission & flange at transfer case. 27 1/2" long from center of u/joint caps.
Item #: FDHD-ZDS9337A
Condition:
New
Not Available
Price: $360.73
Description: Fits '77-'80 K20 & K25 front with automatic transmission, flange at transfer case & either 7200lb or 8600lb GVW. 27 1/2" long from center of u/joint caps.
Item #: FDHD-ZDS9337B
Condition:
New
Not Available
Price: $360.73
Description: Fits '77-'80 GM K10 & K15 front with manual transmission & flange at the transfer case. 23 7/8" long from center of u/joint caps.
Item #: FDHD-ZDS9338A
Condition:
New
Not Available
Price: $329.35
Description: Fits '77-'80 GM K20 & K25 front with manual transmission, flange at the transfer case & either 7200lb or 8600lb GVW. 23 7/8" long from center of u/joint caps.
Item #: FDHD-ZDS9338B
Condition:
New
Not Available
Price: $329.35
Description: Fits '81-'91 GM K10 & K15 front. 29 1/2" long from center of u/joint caps.
Item #: FDHD-ZDS9339A
Condition:
New
Not Available
Price: $329.35
Description: Fits '80-'90 GM Suburban front. 29 1/2" long from center of u/joint caps.
Item #: FDHD-ZDS9339D
Condition:
New
Not Available
Price: $329.35
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W24150
Condition:
New
Price: $998.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W24152
Condition:
New
Price: $1,499.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W38809
Condition:
New
Price: $250.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W39529
Condition:
New
Price: $278.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W38815
Condition:
New
Price: $193.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W46100
Condition:
New
Price: $235.89
Description: USA Standard Gear performance axles are constructed from high-tensile strength 4340 chromoly, use superior manufacturing methods, and feature advanced heat-treating technologies to create an axle...More Details »
Item #: FDHD-ZA W46105
Condition:
New
Price: $154.89
Description: USA Standard Gear open spider gear set for Dana Spicer 44, 30 spline
Item #: FDHD-ZIKD44-S-30
Condition:
New
Price: $182.89
Description: USA Standard Gear replacement spider gear set for Dana 60, 30 spline
Item #: FDHD-ZIKD60-S-30
Condition:
New
Price: $196.89
Description: USA Standard Gear replacement spider gear set for Dana 60, 35 spline
Item #: FDHD-ZIKD60-S-35
Condition:
New
Price: $196.89
Description: USA Standard Gear Replacement Standard Spider Gear Set for Dana 70, 35 spline
Item #: FDHD-ZIKD70-S-35
Condition:
New
Price: $248.89
Description: USA Standard Gear spider gear kit for GM 12 bolt car and truck
Item #: FDHD-ZIKGM12-S-30
Condition:
New
Price: $152.89
Description: USA Standard Gear Master Overhaul Kits provide all of the necessary parts for a differential overhaul in one simple part number. Save time and money, and get the exact parts you need for your specific installation.
Item #: FDHD-ZK D60-R
Condition:
New
Price: $250.89
Description: USA Standard Gear Master Overhaul Kits provide all of the necessary parts for a differential overhaul in one simple part number. Save time and money, and get the exact parts you need for your specific installation.
Item #: FDHD-ZK D60-F
Condition:
New
Price: $299.89
Description: USA Standard Gear Master Overhaul Kits provide all of the necessary parts for a differential overhaul in one simple part number. Save time and money, and get the exact parts you need for your specific installation.
Item #: FDHD-ZK D70-HD
Condition:
New
Price: $499.89
Description: USA Standard Gear Master Overhaul Kits provide all of the necessary parts for a differential overhaul in one simple part number. Save time and money, and get the exact parts you need for your specific installation.
Item #: FDHD-ZK D44
Condition:
New
Price: $269.89
Description: USA Standard Gear Master Overhaul Kits provide all of the necessary parts for a differential overhaul in one simple part number. Save time and money, and get the exact parts you need for your specific installation.
Item #: FDHD-ZK GM12T
Condition:
New
Price: $188.89
Description: USA Standard mini spool for Dana 44 with 30 spline axles
Item #: FDHD-ZP MINSD44-30
Condition:
New
Price: $132.89
Description: Dana 44 front pinion installation kit.
Item #: FDHD-ZPKD44
Condition:
New
Price: $151.89
Description: USA Standard Pinion installation kit for Dana 60 front
Item #: FDHD-ZPKD60-F
Condition:
New
Price: $249.89
Description: USA Standard Pinion installation kit for Dana 60 rear
Item #: FDHD-ZPKD60-R
Condition:
New
Price: $199.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-488T
Condition:
New
Price: $287.89
Description: USA Standard Gear ring and pinion sets are designed to exceed OEM specification. All sets receive rigorous in-house quality evaluation to ensure they pass dimensional, material, and fitment testing.
Item #: FDHD-ZG D44-513T
Condition:
New
Price: $319.89